WW/RW Showdown - N-914 vs Feynlab Pure Rinseless

I did another rinseless wash Thursday. I made sure my bucket was clean to remove that variable. Same results. Dingy water with only clean towels in contact. So I did a test. I left the bucket tilted for a day to see if anything settled out. Checked the bucket this morning and it`s still just dingy colored water. Nothing in the bottom of the bucket. So I`m thinking it`s dye transfer.
 
Britsdaddy said:
I did another rinseless wash Thursday. I made sure my bucket was clean to remove that variable. Same results. Dingy water with only clean towels in contact. So I did a test. I left the bucket tilted for a day to see if anything settled out. Checked the bucket this morning and it`s still just dingy colored water. Nothing in the bottom of the bucket. So I`m thinking it`s dye transfer.
Click to expand...

Or detergent transfer, right?

I ended up leaving my MF WW towel in the solution for 4 day’s or so and no due transfer, but that could just mean those are not transferring their color.
 
Transfer of some sort. The wash water had a tint to it. I`m hard pressed to tell what color it really was. Either way, those towels are now super clean.
 
Just came across this thread - I have been a certified Feynlab installer for going on 3 years now, feel free to ask questions about the product - I LOVE IT!

I ONLY use Pure Rinseless for cleaning my towels, it`s phenomenal and cheap to use!
 
So is your only use for Pure Rinseless is a towel wash, or do you also use it as a rinseless/waterless wash? If using it as a rinseless, what dilution do you mix it at?
 
ShakingHorizons said:
For semi-dirty vehicles I hit it with 1:250, for vehicle that just need dust removed I use 1:384
Click to expand...
I agree with that. I mixed 3/4oz to 1 gallon for a mostly clean wash the other day. I did pre-treat with the same dilution spray before. I can see how 1:250 would work well for a really dirty car. It feels thick and like it would encapsulate well.
 
I used Pure Rinseless today as a pretreat to deep clean my parent’s car which hasn’t had a good hand wash in 2020 <gasp!>. I actually used it at 1:128 since there was no remaining LSP on the car and I was also prepping for adding some HydroBlue. Worked like a charm at cleaning and leaving a bare surface. None of this is probably news to any readers though.

On a second note, I did use the remaining solution from my earlier color transfer test a few weeks ago... this time to clean 5 dirty waterless wash towels, letting sit for a few hours. It cleaned them very well, no doubt.
 
Used it as a waterless wash today on my S3, 1:300 (about 3ish mL of PRW to 1L water). The car had light dust form sitting in the garage for the week and wanted to apply a coat of Polishangel High Gloss Paste Wax. Sprayed the Riseless Wash solution on the car and could see it work on the light dust, wiped it with a plush towel, and used a second microfiber to dry it up. The surface was left without anything and back to initial slickness. Will keep this in the closet as I think it will be useful once the winter comes and can use it as a pre-spray for salt before I do a bucket wash.
 
agpatel said:
Used it as a waterless wash today on my S3, 1:300 (about 3ish mL of PRW to 1L water). The car had light dust form sitting in the garage for the week and wanted to apply a coat of Polishangel High Gloss Paste Wax. Sprayed the Riseless Wash solution on the car and could see it work on the light dust, wiped it with a plush towel, and used a second microfiber to dry it up. The surface was left without anything and back to initial slickness. Will keep this in the closet as I think it will be useful once the winter comes and can use it as a pre-spray for salt before I do a bucket wash.
Click to expand...
What’s your base LSP? Coating I assume?
 
Pretty neat stuff u can use it as a towel wash I’ve been using the pure rinseless for a little under a year it is great stuff. The cleaning power is hard to explain when comparing it to other rinseless washes because it is different. I also use it on interior, after polish as an oil remover, window cleaner.

before I coat a car I have this in sprayer and lay it on heavy and let it dwell then wipe up as it’s drying I’ll use ipa to me I believe I’m getting a cleaner surface than just ipa

I love that it doesn’t bead up on coated cars and has ability to wet the whole panel.
 
Does anyone have any experience with Feynlab`s regular car soap, Pure Wash? I`ve got a few soaps left to finish up, but I`m finding myself reaching still for Pure Rinseless even though it`s warm enough to do bucket washes.
 
Britsdaddy said:
Does anyone have any experience with Feynlab`s regular car soap, Pure Wash? I`ve got a few soaps left to finish up, but I`m finding myself reaching still for Pure Rinseless even though it`s warm enough to do bucket washes.
Click to expand...

It’s good. Nice lubricity and cleans well. Rinses clean as well. Not the most sudsy soap but it is nice.
 
You must log in or register to reply here.
Back
Top