What is the most agressive polish?

[porta]

The car? Audi A4 -03.



I have never used RD3.01, only PO91L and I find that RE3.02 is much more effective on cars with harder clears than 91L. I have been told that RD3.01 and RD3.02 have the same cut and gloss but the last one is upgraded and is more effective.



I mostly finishes with RD3.02, don´t see any different in gloss if I use FF(on light coloured cars) but on darker I always uses FF.



Looking forward for the PO016FA. But I have to much with polishes:



PO85RD3.02 ,PO85RD, PO85RE5, PO106FF and waiting for PO106FA

3M: 80439 and waiting for the 50383

Sonax: Nanopolish(very similar to Menzerna RD3.02) but twice the money. IE very expensive!

 

[maesal]

I heard that RD3.02 has more oils. RD3.01 is my goto for polishing stage, is amazing via PC and rotary, i really like it. And PO106FF is my goto for finishing stage. To my eyes, the finishing achieved by PO106FF is the same as PO85RE5.

Then, the 50383 is the latest finishing polish from 3M?

I found it here:

eBay: 3M Anti-Hologramm Politur 50383 NEU (Artikel 120059375653 endet 11.12.06 16:15:00 MEZ)

I doubt that something will be better than PO106FF (or the new FA), but I don't know...

 

[porta]

On light coloured cars I don´t se any different in gloss if I have used RD3.02 the right way. RE5 and PO106FF have the same gloss on Menzernas scale. I use all three finishing polishes, depends if the car is soft and sensitive or very hard. Soft I go got PO85RD, hard like audi I reach for the P0106FF.



I also doubt that it will give a better finish...so I have to buy it and see



But this polish contains very little abrasives so I cant be a good opition for cars with no swirls just to lift the gloss in the paint.

 

[maesal]

On light coloured cars I don´t se any different in gloss if I have used RD3.02 the right way. RE5 and PO106FF have the same gloss on Menzernas scale. I use all three finishing polishes, depends if the car is soft and sensitive or very hard. Soft I go got PO85RD, hard like audi I reach for the P0106FF.



I also doubt that it will give a better finish...so I have to buy it and see



But this polish contains very little abrasives so I cant be a good opition for cars with no swirls just to lift the gloss in the paint.

Then it will be similar to PO85RE5. I tend to use, if the clear coat is soft or with normal hardness, PO106FF via rotary and a LC finishing PAD or a green polishing Propel PAD, similar hardness and results. Then, in 1 stage I leave the clear coat without swirls and with a very nice gloss. This in the cases where the defects are low, otherwise I use first RD3.01 + polishing PAD + PO106FF + finishing PAD.