tssdetailing
New member
I'm going to apologize in advance, the photos I shot were rather rushed, and limited. The weather was crappy and I wanted to put more effort into the gig than the photos. That being said, here is a 14k mile young, Spice Red 08 GXP. The owner wanted my Stage III package in lieu of the GONE event in Iowa. Total time invested was 9.5 hours.
Interior:
• Doors/plastic cleaned with Meguires Interior APC
• Leather seats/arm rest cleaned with Adam's Leather Cleaner
• All surfaces thoroughly conditioned with Adam's Leather Conditioner for a rich, satin black finish and UV protection.
Engine/Wheels:
• Pressure rinsed to remove loose particle, then foamed down.
• Agitated with various brushes and heavy grease removed with Grime Reaper.
• Exhaust cleaned/polished with P21S polishing soap.
• Painted engine surfaces polished with Griots 3" polisher/white pad and Adams Fine Machine polish.
Exterior:
• Foamed down with mix of APC and soap (this was to cut any existing wax).
• Clay barred to remove any (and there was VERY LITTLE) contamination.
• Foamed and washed one more time then dried with Adams Gold towels (old school, they are white now)
• Paint polished with Flex 3401 D/A, Adams white pad and Fine Machine Polish; topped with Blackfire Wet Diamond sealant.
• Tires coated with TufShine tire clear coat.
^50/50 shot under halogen lamp after machine polishing the left side with Adams Fine Machine Polish, right side untouched.
Interior:
• Doors/plastic cleaned with Meguires Interior APC
• Leather seats/arm rest cleaned with Adam's Leather Cleaner
• All surfaces thoroughly conditioned with Adam's Leather Conditioner for a rich, satin black finish and UV protection.


Engine/Wheels:
• Pressure rinsed to remove loose particle, then foamed down.
• Agitated with various brushes and heavy grease removed with Grime Reaper.
• Exhaust cleaned/polished with P21S polishing soap.
• Painted engine surfaces polished with Griots 3" polisher/white pad and Adams Fine Machine polish.






Exterior:
• Foamed down with mix of APC and soap (this was to cut any existing wax).
• Clay barred to remove any (and there was VERY LITTLE) contamination.
• Foamed and washed one more time then dried with Adams Gold towels (old school, they are white now)
• Paint polished with Flex 3401 D/A, Adams white pad and Fine Machine Polish; topped with Blackfire Wet Diamond sealant.
• Tires coated with TufShine tire clear coat.





^50/50 shot under halogen lamp after machine polishing the left side with Adams Fine Machine Polish, right side untouched.