Rolls-Royce Apparition concept messes with our heads

I am adding clear corner turnsignals to the S4. I already added the spoiler. And may and a ECU chip also.



For the BMW I am installing brand new carpet and seat upholstery, new brake lines, a heater valve, electronic ignition and will top it all off with a custom installed BMW Roundel logo in the steering wheel hub. I'll post pics of that one!
 
Not really sure what I'm going to do yet.



First thing on the list is to get the money!



Change out my rear diff to a 3.73

Lightning Air Dam w/ fog light kit

Dual Exhaust (Probably Borla)

Air Ram hood

Air Force One Intake

K&N Filter

Superchip

Sunroof :cool:

Custom Bucket seat w/ center console

LCD with DVD and playstation :D

I know I live in New Orleans but Heat Seats



Gotta lotta stuff that I wanna do. What will I end up actually doing? ermm... Not a lot :D Probably going to start doing mobile detailing on the weekends to help get the money



Edit: and for the mobile detailing I'll probably drop a 50Gal watertank in the bed.
 
'94 Maxima GXE

No plans to customize it. Just plans to repair and do some minor maintenance work on it (Front Bumper, Brakes (Just got my Brembo rotors yesterday, Driver's side Window Switch, Ball Joints (Gotta love those Chicago potholes :rolleyes: )so I can trade it in on......

'02 Maxima SE

Customization plans for the '02 are the following:

Audio:
Eclipse 4441 HU (Taken from my current '94)
Eclipse CH5061 In Dash CD Changer
Eclipse 37601 Line Balancer
JL Audio 300/4 amp
JL Audio 500/1 amp
2 JL Audio 12W3 Subs
JL Audio XR 650 CX Coaxial Speakers (Rear Door)
JL Audio XR 653 CS Component Speakers (Front Stage)
Audio Control EQT Equalizer

Exterior:
18" Chrome OZ Racing Antares Rims on Michelin Pilot Sport Tires
http://www.ozracing.com/products/wheels/monoblock/antares.html#
Stock Rims will have Bridgestone Blizzaks or Michelin Pilot Alpins on them.
20th Anniversary Edition Door Sills
http://www.courtesyparts.com/secondtier_a33.html
FIAMM 130 decibel Horn
PIAA XtremeWhite or Raybrig Metal White H4 (Foglights)

Interior:
20th Anniversary Edition Pedals


Year 2:

Stillen Headers

Also, I am planning to add WarpSpeed's Stage II subframe connectors and an Addco Rear Sway Bar to the equation.

For the interior, I am going to need a little help from you guys. I would like to put a Black Birdseye Maple Wood dash kit on the inside. The problem is finding someone that has the kit.
 
I picked up a 3" cat-back Thermal Research & Design exhaust for the WRX a couple of weeks ago, and a K&N panel filter and a hacked up airbox from a friend about a week after that. I plan on ordering 17" wheels and tires here in the next couple of days (P1 replicas from a company called Rota, mounted with Falken Azenis RS or ST115 tires; see attached pic for a TireRack representation of the WRX wearing P1s). Other plans for the summer include a short shifter, an intercooler sprayer system, and possibly a gauge package. I already have a HUD boost gauge, but will add oil pressure/temp, fuel pressure, EGT, and maybe intake air temp. I know of a source for custom dual-purpose gauges (for example, you can get intake air temp and EGT on the same gauge . . . picture below), so I could fit up to six functions in the WRX center dash pod, which holds three physical gauges.

<em class='bbc'>Click pic[/i]



New shoes for the WRX:
 
The car shown here is a 2001 Anniversary Edition with the rims on it. The only difference is that the rims shown are silver as opposed to chrome and they are 19" as opposed to 18".
 
I'm waiting for some new wheels to become available. I'm going with this setup: (AutoCouture Magnifiques 19x9.5 front and 20X10.5 rear)


fdec3443.jpg



After that, I'm on a holding pattern until the Blitz Twin-Supercharger setup becomes available in the US in June.

fdfbbadf.jpg
 
for my '00 Civic SI here are my plans.. (in order of how i'll do them.. keep going down the list till i run out of $$$.. if i even have enough to get started ;))



Comptech icebox cold air intake

Coilover kit to lower

Comptech 4-2-1 header

Mugen twinloop exhaust

17 inch spoon rims /w supra 712 tires

Body kit (yet to be determined)

Greddy Turbo kit

Fuel upgrades

Tuning



that's the list.. if im lucky i'll probably only have enough money to work the 1st two in this year... rest will have to wait. that will be some improvement at least
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by Gene Arch [/i]
<strong class='bbc'>I'm waiting for some new wheels to become available. I'm going with this setup: (AutoCouture Magnifiques 19x9.5 front and 20X10.5 rear)


fdec3443.jpg



After that, I'm on a holding pattern until the Blitz Twin-Supercharger setup becomes available in the US in June.

fdfbbadf.jpg
[/b]</blockquote>
What is that!!!!!!!!!! It is bad!
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by Redcar GUY [/i]
<strong class='bbc'>

What is that!!!!!!!!!! It is bad! [/b]</blockquote>
I think that is one of those Lexus SC430s...

Those things are like 70k :eek:
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by Redcar GUY [/i]
<strong class='bbc'>

What is that!!!!!!!!!! It is bad! [/b]</blockquote>
The Car: 2002 Lexus SC430
The engine: SC430 w/ Twin Blitz Superchargers 425hp at the rear wheels, over 510HP at the flywheel.

I already have the Dazz Matiz Wheel (19x9 & 19x10) with the L-Sportline adjustable suspension. Something like this pic, but not quite as low. This car was lowered 3" front and 2" rear. Mine is 2.5" front and 2.0" rear. This car also has the evolution front spoiler. I'm still thinking about adding the spoiler.

fe4fbb37.jpg


If my car was white, I'd go with the Wald kit like this one:

fdebe755.jpg
 
Something else for my "maybe" list:



Although I've seen "painting the sideskirts" mentioned as a mod on i-club in the past, only recently did I run across a pic (see attachment) . . . I really like the look; the car looks much lower by matching the skirt color with the body. Even better, Subaru of America is offering them as OEM pre-painted replacement parts, so there will be no need to involve a body shop.



So, what do y'all think? :up? :down?



Tort
 
<blockquote class='ipsBlockquote' >

<em class='bbc'>Originally posted by TortoiseAWD [/i]
<strong class='bbc'>Something else for my "maybe" list:

Although I've seen "painting the sideskirts" mentioned as a mod on i-club in the past, only recently did I run across a pic (see attachment) . . . I really like the look; the car looks much lower by matching the skirt color with the body. Even better, Subaru of America is offering them as OEM pre-painted replacement parts, so there will be no need to involve a body shop.

So, what do y'all think? :up? :down?

Tort [/b]</blockquote>
Yeah, I was thinking getting some painted side skirts for our Accord. I'd like to get the upper model (EX) look. That said, I'd like to get some factory alloy EX rims if a great deal comes along.
 
This year...since I am due for replacement of a few wear and tear items....



-Going to put an exhaust on the car...still working on the brand

-Upgrading my brakes from 11" to 11.3" up front...

-Plan on chipping the ECU too if I get around to it. (Stock chip is soldered to the board :mad: )

-Need to figure out something to do with my rear fog switch...(long story).
 
On the '02 I was going to put the body kit from the '01 Anniversary Edition (shown in the "representation" of the Max with the rims) but the major issue with that is that the grille opening for the '02 is larger than the '01 which means that they might have to do some fabrication with the front bumper since the air dam is part of the bumper.
 
New wheels and tires due to arrive tomorrow . . . I've attached a pic of the wheels; I'll post pics of the car when they're mounted.



Tort
 
You must log in or register to reply here.
Back
Top