s2k robert
New member
I read alot about the oily film and hazing if you use QD to wipe off the SG when it gets to "cakey", and I was wondering if I do a second layer WOWO will it still do it?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
shortspark said:I have been a long time fan of the Klasse twins. However, yesterday I found that Jeff's Jett worked easier than SG. I applied AIO as usual. Then, I had the second generation Jett laying around and thought I would try it. This is the version that is either applied with the traditional method of applicator pad, or, with the sprayer attached, as a wowo similar to a QD. I was able to apply three coats in one day using Jett because it will cure in about an hour. The last coat should remain untouched for 24 hours before putting anything else on, such as a QD. SG in contrast, requires at least 12 hours between coats and the car should not be driven or left in the open during these periods.
Both SG and Jett look the same on my billit silver Honda Ridgeline truck. I am looking forward to trying Trigger now as I understand it is even easier than the second generation Jett. Will I do away with SG? Well, it all depends on the durability issue. If Jett does not last as long, I will return to SG.
sWISHbrade said:Please keep us updated on Jett's durability. Thanks
shortspark said:Plus, I QD often and put stuff on like Wolfgang's Sealant Spritz and Menzerna's HGAS about once a week. These are almost LSPs in their own right.