imported_mburnickas
New member
Subject:
Jeffs Werkstatt Quick Wash (QW) and Acrylic Glos (AG) review on a light-moderate dirty black car (Lexus ES300).
Objective:
To state the outcome of JW QW and AG; What does it do; performance, ease of use etc.
Set-up:
Utilized my “old-school� 1998 Lexus ES300 after 6-days of almost 100 degree and thunderstorms (every day). Driving back and forth to work, 17 miles one way.
Procedure:
Spray QW and/or AG on dirty surface and see out it performs utilizing a MF towel.
I parked my car in a 98-degree garage 4 hours before use. I shook the bottles up for 30-seconds each.
QW was sprayed at 1 spray per panel and 2 for (half the hood). AG was the same way. Kind of like applying AJT to the surface.
BOTH were wiped with one side of MF towel using “towel� weight and then the MF towel was turned to “dry� side and then wiped again.
Conclusion:
QW- IF you have a good base-coat of AJ(T) QW will return the slickness of the AJ (T); but, it only cleans the surface. No marring etc. It is like Poorboys S&W in my eyes BUT without any streaking. How this [PB] product would re-act with JW I have no idea. I can try it if you want?
IF you have gone sometime without AJ(T); then AG will clean AND add some slickness and depth to the paint. On my car, it added some additional “gloss� to the black car.
Both where VERY easy to remove no matter the thickness/ amount you sprayed. Having stated that, I would recommend at least (2) MF towel to apply. One to clean the surface and one for the final buff. I did not use very much either. After doing 3 “cleanings� the bottle is not even down to the end of the taper.
Only issue I have is I WISH his QW would come in larger sizes since I do take care of (4) cars/SUV, bike and tractor. But then again, you do not use much..Maybe it is the OCD in me…LOL
Summary
For the small delta in price, I would just get the AJT if using AJ on the paint. For the extra $$$, it is worth it (2 extra dollars)
Jeffs Werkstatt Quick Wash (QW) and Acrylic Glos (AG) review on a light-moderate dirty black car (Lexus ES300).
Objective:
To state the outcome of JW QW and AG; What does it do; performance, ease of use etc.
Set-up:
Utilized my “old-school� 1998 Lexus ES300 after 6-days of almost 100 degree and thunderstorms (every day). Driving back and forth to work, 17 miles one way.
Procedure:
Spray QW and/or AG on dirty surface and see out it performs utilizing a MF towel.
I parked my car in a 98-degree garage 4 hours before use. I shook the bottles up for 30-seconds each.
QW was sprayed at 1 spray per panel and 2 for (half the hood). AG was the same way. Kind of like applying AJT to the surface.
BOTH were wiped with one side of MF towel using “towel� weight and then the MF towel was turned to “dry� side and then wiped again.
Conclusion:
QW- IF you have a good base-coat of AJ(T) QW will return the slickness of the AJ (T); but, it only cleans the surface. No marring etc. It is like Poorboys S&W in my eyes BUT without any streaking. How this [PB] product would re-act with JW I have no idea. I can try it if you want?
IF you have gone sometime without AJ(T); then AG will clean AND add some slickness and depth to the paint. On my car, it added some additional “gloss� to the black car.
Both where VERY easy to remove no matter the thickness/ amount you sprayed. Having stated that, I would recommend at least (2) MF towel to apply. One to clean the surface and one for the final buff. I did not use very much either. After doing 3 “cleanings� the bottle is not even down to the end of the taper.
Only issue I have is I WISH his QW would come in larger sizes since I do take care of (4) cars/SUV, bike and tractor. But then again, you do not use much..Maybe it is the OCD in me…LOL
Summary
For the small delta in price, I would just get the AJT if using AJ on the paint. For the extra $$$, it is worth it (2 extra dollars)
