autoconcierge
New member
Just finished yesterday, a longtime client picked up this pre-owned Rapide that was not well maintained so I was brought in to get the vehicle back into "As-new" condition. Daniel from Car Connoisseur was up this week to help me with some major correction details.
Vehicle before the wash/decon steps were carried out.
Condition of the clearfilm on the hood, someone had used a rotary on it...................... not good.
Compound residue in the jambs(Shuts for the UK guys......).
Fingernail damage.
Deep scratches on the rear of the car(95 % correction later as the finish in that area was sub 97 microns).
Compound residue was everywhere.
Typical Aston DA sand scratches left behind.
Scratches removed.
More defects in the same area.
Defects corrected.
Daniel cutting out defects from the rear passenger door.
Why I missed my lift back at the shop.
Daniel working hard along side me(We would get three days of work done in two due to his work ethic).
Cutting the roof.
Some 50/50's of the one of the doors.
During polishing stage.
Vehicle before the wash/decon steps were carried out.



Condition of the clearfilm on the hood, someone had used a rotary on it...................... not good.

Compound residue in the jambs(Shuts for the UK guys......).

Fingernail damage.

Deep scratches on the rear of the car(95 % correction later as the finish in that area was sub 97 microns).

Compound residue was everywhere.

Typical Aston DA sand scratches left behind.

Scratches removed.

More defects in the same area.

Defects corrected.

Daniel cutting out defects from the rear passenger door.

Why I missed my lift back at the shop.

Daniel working hard along side me(We would get three days of work done in two due to his work ethic).

Cutting the roof.

Some 50/50's of the one of the doors.


During polishing stage.
