RyanbabZ71 said:
I think its the Z5 i use the Z2&5 regularly
Ryan,
Z5 is a very good product, but it will only fill in very slight swirls and other minor blemishes.
I use Menzerna IP and FPII as a prep before applying Z5 and Z2Pro. When I ordered Z2 three months ago, I got the new "Pro" version in the old bottle. (Sal was slipstreaming them in the old bottle at the time.)
I have no experience with the old Z2, but people say the Pro version is much better. I can say that I like the affect that Z5 has to fill in minor blemishes that are left after an IP/FPII prep (a few paint nicks and deeper scratches). Adding Z2 Pro as topper adds to the "pop" and gloss.
Interestingly, I've heard that with the new Z2Pro, you don't need to prep with Z1 or add ZFX to the Z2Pro IF you already have prior coats of Z5 or Z2. One fellow said that he applied it with a PC and a red pad and the it flashed within about 20 minutes (no ZFX) and came off easily.
Currently my '02 Dolphin Gray, Audi A4 has two coats of Z5 and one coat of Z2Pro that have been on for about three months. Other than washing with Z7 and QD'ing with Z6, nothing has been done to the paint. Even after three months, water still beads in high, tight beads.
Last Monday night (just for grins), with NO ZFX added, I applied a quick second coat of Z2Pro to about 1/4 of the hood. The garage temp was 57 degrees (from temp gauge in garage) and the humidity was about 75% (damp). Normally these are not great conditions for Zaino. The next morning, I buffed it out quickly with a soft MF towel, followed by a quick spritz of Z6 QD. It buffed out very quickly and easily. This second coat of Z2Pro added to the shine and depth. It's a little hard to quantify, but the depth was the key improvement.
Overall, I am VERY pleased with the result. In January, I'm going to strip off the FMJ from my Wife's '05 red Subie Forester and apply Z2Pro + ZFX. I'll report back on the results.
Regards,
Dan.