Logan06GTO
New member
This was my first time big detail. I got MOST of the swirl marks out. I could have done a lot better, but I didn't know what I was doing to much. Anyways. There is a little dust/fabric particles because of the new DF Alpin Microfibers that I use (awesome MicroFibers if you are in the market for some)
Steps:
1. Dawn Wash
2. Z-6 wipe down b/c I had to drive to a carwash ( I live in the Dorms at Texas Tech University)
3. Z-18 ClayBar
4.Z-7 Car Wash
5. Z-6 Wipe Down
6. Z-PC with Orange UDM Pad on a Ultimate Detailing Machine (wish I would have did a run with a white pad also, but that can wait until the swirls come back)
7. Z-6 Wipe Down
8. Z-5 Polish with ZFX
9. Z-6 Wipe Down
10. Z-5 Polish with ZFX
11. Z-6 Wipe Down
12. Z-2 with ZFX
13. Z-6 Wipe Down
14. Cold Shower
When do ya'll think I should do the Z-PC again? I know that I'm not going to use it like every weekend, but how about in August (before I come back to school) Aprox August 10th? or is that to soon?
PICS. Also I took the Front License Plate off.
(Below)This there is a little dust on this, and a spot I missed when doing the Z-6 Wipedown...Oh and the Dealer installed "nicks"
(Below)Missed another spot when wiping down...
(Below)Again new MF's so a little dusty, and if you've been to Lubbock, TX you know how dusty it is.
10hrs
Thanks!
Steps:
1. Dawn Wash
2. Z-6 wipe down b/c I had to drive to a carwash ( I live in the Dorms at Texas Tech University)
3. Z-18 ClayBar
4.Z-7 Car Wash
5. Z-6 Wipe Down
6. Z-PC with Orange UDM Pad on a Ultimate Detailing Machine (wish I would have did a run with a white pad also, but that can wait until the swirls come back)
7. Z-6 Wipe Down
8. Z-5 Polish with ZFX
9. Z-6 Wipe Down
10. Z-5 Polish with ZFX
11. Z-6 Wipe Down
12. Z-2 with ZFX
13. Z-6 Wipe Down
14. Cold Shower
When do ya'll think I should do the Z-PC again? I know that I'm not going to use it like every weekend, but how about in August (before I come back to school) Aprox August 10th? or is that to soon?
PICS. Also I took the Front License Plate off.



(Below)This there is a little dust on this, and a spot I missed when doing the Z-6 Wipedown...Oh and the Dealer installed "nicks"

(Below)Missed another spot when wiping down...




(Below)Again new MF's so a little dusty, and if you've been to Lubbock, TX you know how dusty it is.

10hrs
Thanks!