Winter Prep for the Bimmer and Range Rover

Well, snow is near, and snow means salt, and salt means a need for protection. So this year I went with EX-P topped with my own creation, "Natty's Sky" (50% Natty's White & Natty's 50% Blue)on the Bimmer and Werkstatt's topped with P21s on the Range. Looked great, and should be plenty of protection at least through Feb.



First up, The Rover.



Got this truck in July, did a full polishing then with the PC, so decent shape.



Just hit it with OP On a green EDGE 2000 light cut pad @ 1600 RPMS

Then spritzed with QD and finished down with a blue EDGE 2000 Finishing pad at 1500 RPMS

Next AJ on PC with an LC blue on 3 x2

Topped with a layer of P21S

Megs Endurance HIGH GLOSS on tires

303 On trim

ArmorAll in wells



11-5-06014.jpg








And My Favorite-









Next up is the 330



I LOVE this car. Rides a little hard, but handles better than most cars out there. Bought this in July too, and have only done a Clay-Glaze-Wax since then. Now it was time to tackle the Dealer installed swirls.



Process:



ONR

Clay Poly clay

EC/OP On EDGE 2000 Orange @1900 RPMS

OP On EDGE 2000 Green @ 1700 RPMS

OP on PC White Pad Speed 6

EX-P by hand, 30 min between, 2 coats

Nattys SKY



Rims-



Remove, scrub with WB 2:1

PB's Wheel Sealent x4

TOL Tire Cleaner

Meg's Endur. High Gloss x2



I think she came out good--



Before--



10-16-06019.jpg
 
Scott-



Nattys Sky is a litte creation I made up when I had about half a each tin of nattys blue and white together. Melted them together, and it has the easy application of white, with the depth of blue.
 
Natty's sky i like that one. 50/50 i most likely would have done the same thing if i were in your shoes



Looks good from what you can see



Did it come out they way you expected?
 
Mr.Cool said:
Natty's sky i like that one. 50/50 i most likely would have done the same thing if i were in your shoes



Looks good from what you can see



Did it come out they way you expected?





The Range Rover- Yes, came out better than I'd think.



The Bimmer- WOW this is hard paint to work with. :grrr Not only hard, but marrs so easily! I ended up with about 5-6 marrs from my mf's. Came out nice though.
 
Back
Top