white lake country ccs pad

donbeezy

donbeezy

New member
used some HD speed over the weekend w/ a white pad. had time to clean it this morning and HD speed pinkness is stained on the pad. should i be concerned on trying to get the color off? or throw away the pad? used APC and warm water to clean the pad
 
Lots of things color pads.

Normally I only use my pads once then out, but probably should be no problem
 
Ronkh said:
Lots of things color pads.

Normally I only use my pads once then out, but probably should be no problem
Click to expand...

attachment.php
 

Attachments

  • 3qlrv3.jpg
    3qlrv3.jpg
    23.8 KB · Views: 88
Snappy Clean Powder in those individual packets has worked great on my zillion pads for years..
It is low foaming and rinses very well, so you get really clean pads again..
Its strong and will remove all the oils in your hands so I always like to use a pair of nitrile gloves or something when I clean all my pads by hand..
Its always good to throw the just finished using pads in a bucket of this same solution and push them under so they soak it up.
Then come back later and take them out perhaps make a fresh batch or not, and clean them and rinse them..
So easy peasy... :)
Dan F
 
ShawnF350 said:
I should have also added. A stained pad won't affect use so as long as its clean continue to use it.
Click to expand...

thanks, one pad has dark stains on it from when i touched a gasket. couldnt get it removed but the pad washed out clean every time.

next time ill try the pressure washer on a older pad and see how it goes. and need to remember to soak my pad right away instead waiting till the next morning
 
Or, dedicate it...use the same pad with the same polish till it starts to wear then toss it. I too have found some polishes stain. Those that do I try to stay away from them.
 
You must log in or register to reply here.
Back
Top