Which pad for 1Z High Gloss?

J

jbone

New member
I have been using the Edge white foam polishing pad. I use it to get rid of holograms, however it doesnt seem to get rid of all of them. Am I not using it right or using the wrong pad? Maybe I should go with the 3M UF. Thanks!!
 
Eh..not really the wrong forum as you're using it by machine :nixweiss



The holograms might be too severe for the 1Z HG, I've run into that before. The HG is, IME/IMO a finishing polish on harder paints, so there's only so much correction (including holograms) that it can do.



So you might need a more aggressive product before the 1Z HG. IMO the HG is *really* great with a very mild pad for burnishing/jeweling medium-to-hard clear.
 
thanks for the reply. It seems as though it definitely helped but there were still some left over. I guess 3m UF it is!!!



(It was in the wrong forum earlier and moved)
 
jbone- It'll be interesting to see if the Ultrafina works better :think: Note that even though a lot of people here are using Ultrafina as the second of a two-step process, 3M really sells it as the third step of a three-step process.



It's actually 1Z that has their correction process down to just two products, which get me wondering- what left the holograms that're too severe for the 1Z HG?
 
You must log in or register to reply here.
Back
Top