What is building layers?

C

chasnj

New member
I've been reading the product review and have read several items that mention building layers, I was just wondering what this meant.



Also I am thinking about detailing my wifes villager van that we just got. I'm thinking about using AIO and S100. If anyone could give me tips on how to apply this the correct way for a deep wet look.
 
Building layers is just like it sounds (actually, to answer both questions at once):



If you have Klasse SG, it might go something like this...

1) Wash

2) Clay

3) AIO

4) Klasse SG (put one coat on, wait for the next day and put another coat on, and so on.....)

5) After you are satisfied with the layers of SG, top with S100.



Maintain with QD spray and wash every other week or so...
 
There was more than repeated coats of a product. It had to do with polymers curing and crosslinking, bonding to the paint surface, etc. Quite frankly, I have forgotten it all... we haven't had many technical discussions for a while.



If I'm not mistaken, the Autopia term for "layering" used to do with sealants (Klasse and Zaino), and not carnaubas as it doesn't bond or build layers.
 
BW said:
There was more than repeated coats of a product. It had to do with polymers curing and crosslinking, bonding to the paint surface, etc. Quite frankly, I have forgotten it all... we haven't had many technical discussions for a while.



If I'm not mistaken, the Autopia term for "layering" used to do with sealants (Klasse and Zaino), and not carnaubas as it doesn't bond or build layers.
Click to expand...



Carnaubas can be layered. Two things you have to watch out for with carnaubas and layering though. Putting too many layers of a carnauba on can cause a wax build up and haze the paint since carnauba is optically clear. You also have to make sure it isn't a cleaner wax as that will strip some of the previous layer off so you really aren't producing a layer. You also have to wait about 4 hours b/t coats of carnauba.
 
The solvents in a non-cleaner wax will take off the old carnauba "layer." What you're really "layering" are the oils... like the old Blitz Concours Trick that was once popular.



Intel486 said:
You also have to wait about 4 hours b/t coats of carnauba.
Click to expand...



Who told you that?
 
Some quotes...

Remember the solvents in a carnuba wax are strong enough to to keep it in a fluid state. Carnuba doesn't really layer, just kind of reappy and replenish itself as far as durability goes. As far as shine, that may be improved because you are adding more oils.
Click to expand...

Layering a carnuba adds little to durability. In a sense, because a carnuba formula contains solvents to soften the carnuba it is almost kind of like a reapplication of carnuba but adding more oil. Layering carnuba can have a visual cosmetic effect. If you don't notice a difference you are basically kind of reapplying and not adding any more protection unless the first coat has deteriorated over a few weeks time.
Click to expand...



Carnauba doesn't cure, it doesn't bond.
 
BW said:
Who told you that?
Click to expand...



I remember reading it somewhere. I'll try to find that out.



BW said:
Carnauba doesn't cure, it doesn't bond.
Click to expand...



Where did you get those quotes from?



I remember carnauba being able to be layered. Carnauba will set onto the paint after the solvents have evaporated. If you apply another coat, then you are putting another layer on. You can actually keep building layers to the point that the paint gets a murky look. i.e. wax build up
 
Thanks for all of your tips. So layering is putting several coats of AIO and then putting S100 on. Letting everything dry and then taking it off. If this is correct let me know Please.



jason
 
chasnj said:
Thanks for all of your tips. So layering is putting several coats of AIO and then putting S100 on. Letting everything dry and then taking it off. If this is correct let me know Please.



jason
Click to expand...

Jason:

The layering issue I won't address, but when you refer to AIO and S100, I can tell you my experience.

I applied AIO two times. Not to layer, but to be sure I had covered everything completely. I then did the same thing with S100, for the same reason. The results were great. You will not be disappointed.

My next full detail will have S100 Shine Enhancing Paint Cleaner before the AIO and S100. It has been posted that the SEPC and AIO seem to work together to give even better results. As good as the AIO/S100 looks, I am really looking forward to it.

AIO also works great as a base for Platinum UPP which I have on my van. The finish looks just like the AIO/S100 combination. Here again, I will use the SEPC/AIO prep before the UPP on my next detail.



Charles:wavey
 
chasnj said:
Thanks for all of your tips. So layering is putting several coats of AIO and then putting S100 on. Letting everything dry and then taking it off. If this is correct let me know Please.



jason
Click to expand...
I think generally when people talk about "layering" they are almost always using a product that has little or no cleaning properties. BW and Intel were discussing the problem with the product's solvents, which is a separate issue. AIO has mild abrasives/cleaners in it, so it's usually considered unlayerable. On the other hand, products that are for pure protection only, like Klasse SG, Zaino Z2/5, etc, can be built up in several layers of increasing protection and gloss (to a limit of course). Whether carnauba ("traditional") waxes layer or not is an ongoing debate, as you have seen. ;)



Layers are built up over multiple application sessions, usually over a few days, not in one sitting.
 
chasnj said:
Thanks for all of your tips. So layering is putting several coats of AIO and then putting S100 on. Letting everything dry and then taking it off. If this is correct let me know Please.



jason
Click to expand...



Maybe I am just misreading the way you worded this.



You want to apply AIO, let it haze and then buff it off. That is one layer. Wait for it to cure and then apply another coat in the same way. That would be a second layer. Wait for it to dry and you can apply something else like S100.
 
You must log in or register to reply here.
Back
Top