Wetsanding then polishing with a PC?

K

kovalchuk71

New member
Is this possible? I have some scratches (I can feel with my nail), that I would like to either get out or severly diminish. Can I polish the scratches from wetsanding out with a PC and how would I go about doing this? Thanks guys!



Chris
 
kovalchuk71 said:
Is this possible? I have some scratches (I can feel with my nail), that I would like to either get out or severly diminish. Can I polish the scratches from wetsanding out with a PC and how would I go about doing this? Thanks guys!



Chris
Click to expand...



You can with Meguiars 105 but I would have to think a rotary would do a better job.
 
Can you post some close up pics?



Generally, if you can feel it with your finger nail, it's too deep. Do not try

to level the surrounding paint to that depth as you'd only be asking for

trouble.



I don't use a PC but folks have been able to work wonders it seems.
 
Right, aim for "better" and not "perfect". Don't want to thin the clear too much.



I've never had problems removing ~2K-3K sanding scratches via PC. Consider that the sanding marks are a lot of fine, closely-bunched little scratches. Compare the "damage" from sanding with 2K to the damage of a nasty RIDS...and people take out RIDS via PC all the time (people even do it by hand behind door handles). The hazing from 2K paper is a lot less serious than a nasty fingernail scratch behind a door handle.
 
You must log in or register to reply here.
Back
Top