ultima line

I also can't wait for it to warm up some more so I can use the combo. :D

57CC863F-BE38-4217-8D9D-2318E6BF954B-11054-000005C912AF38EF_zps97bb0abb.jpg
 
I have no experience with Ultima's Pre-Wax Polish.

Ultima paint Guard Plus is a gorgeous clear sealant. Like any other sealant proper paint prep is crucial to the final appears AND proper adhesion of the sealant.

Wipe on and walk away, it really doesn't get much easier.....:bigups
 
BobbyG said:
I have no experience with Ultima's Pre-Wax Polish.

Ultima paint Guard Plus is a gorgeous clear sealant. Like any other sealant proper paint prep is crucial to the final appears AND proper adhesion of the sealant.

Wipe on and walk away, it really doesn't get much easier.....:bigups
Click to expand...

That's great to hear, Bobby. I don't have a machine so I'll be polishing by hand. I'm hoping to get some good results. Lucky for me my paint is in good condition with minor swirls.
 
Great product! I recently tried BF Crystal Seal and can't complain about it either! It couldn't be easier as long as your car is squeaky clean before application.
 
Swanicyouth said:
Heard a rumor some BF is made by Ultima(4*). Seems to make sense
Click to expand...

Ultima is great stuff, but yea I cant tell a difference bewteen that and BF.
I am sure there is only a handful of chemical companies that make car care products, could be made by the same folks.
 
Great stuff. I was pretty surprised how well UPPP cleans up the paint. UPGP is one of the original wipe on walk away sealants. Very easy to use. I find that 3 coats really improves the look.

I have used Ultima products since they were released and beta tested most of the products. They are all awesome.
 

The Ultima stuff is very good.

UPPP can remove marring and such from paint when used even by hand and the supplied orange applicator. I must say I was very surprised. I would definitely suggest using it before UPGP.

UPGP is super easy to use and one of the baseline WOWA sealants IMO. To be honest though I have found BFCS easier to use and to level out over application.


 
TroyScherer said:

The Ultima stuff is very good.

UPPP can remove marring and such from paint when used even by hand and the supplied orange applicator. I must say I was very surprised. I would definitely suggest using it before UPGP.

UPGP is super easy to use and one of the baseline WOWA sealants IMO. To be honest though I have found BFCS easier to use and to level out over application.


Click to expand...

Troy have seen a difference in looks and durability between the UPG+ and BFCS?
 
Very happy with UPGP use it on boat hulls, stuff is very durable in the salt water environment so im sure its just as great on cars!
 
dd1101 said:
Troy have seen a difference in looks and durability between the UPG+ and BFCS?
Click to expand...


Looks: Slightly, UPGP has more of a sterol candy coating sealant look with 2-3 coats. BFCS does have deeper look that is what I consider the BF look. But honestly on properly prepped surfaces I think even I would have a hard time guessing which was which if I didn't know.

I am actually considering doing a 3 or 4 way comparison video and test on a few of these WOWA sealants.


Durability: to be honest I have not done any serious durability testing on any of these. I have only let them go 2 months or so. Even these the beading a sheeting was still there. But it is so easy to top it up that I can't resist. After a good wash I can blow it dry and the do an application in another 10-15 minutes.

 
Thanks! Looking forward to your video!! I just realized you are only one state over :rockon

TroyScherer said:

Looks: Slightly, UPGP has more of a sterol candy coating sealant look with 2-3 coats. BFCS does have deeper look that is what I consider the BF look. But honestly on properly prepped surfaces I think even I would have a hard time guessing which was which if I didn't know.

I am actually considering doing a 3 or 4 way comparison video and test on a few of these WOWA sealants.


Durability: to be honest I have not done any serious durability testing on any of these. I have only let them go 2 months or so. Even these the beading a sheeting was still there. But it is so easy to top it up that I can't resist. After a good wash I can blow it dry and the do an application in another 10-15 minutes.

Click to expand...
 
I haven't used the products the OP is questioning, but I do use the Ultima Quick Detail spray and it works great! Love that stuff. They do make a great product.
 
You must log in or register to reply here.
Back
Top