Toyota Avalon

B

bluec

New member
Finished working on one of my clients cars (My boss's actually). He's trying to sell this Black Toyota Avalon (smokers car) and I could already tell it was going to be a challenge. There was clearcoat gone on most of the door handles, but I noticed the rest of the paint was still possible to fix. The Before and After is amazing....





Engine Bay



Before

fae47ffe.jpg




After

408be406.jpg




Trunk Lid



Before

1412b614.jpg




After

00ecdd5e.jpg
 
Finished working on one of my clients cars (My boss's actually). He's trying to sell this Black Toyota Avalon (smokers car) and I could already tell it was going to be a challenge. There was clearcoat gone on most of the door handles, but I noticed the rest of the paint was still possible to fix. The Before and After is amazing....





Engine Bay



Before

fae47ffe.jpg




After

408be406.jpg




Trunk Lid



Before

1412b614.jpg




After

00ecdd5e.jpg
 
Oh btw, this was my process:



1) 3M PII RC w/ Meguiars Foam Cutting pad w/ PC 7424

2) 3M PIII MG w/ Meguiars Foam Polishing pad w/ PC 7424

3) Collinite 845 w/ Meguiars Foam Finishing pad w/ PC 7424 (lowest speed)



I am very happy with this setup, although it didnt take out 100% of the scratches on the hood, I wasnt going to try mostly because there wasnt much clear coat left in areas. The rest of the car is pretty much 100% free of swirls. Interior pictures won't be included, because I forgot to take pics of the interior before I cleaned it up, but just imagine a smokers car, that was probably the hardest part of the car.
 
Oh btw, this was my process:



1) 3M PII RC w/ Meguiars Foam Cutting pad w/ PC 7424

2) 3M PIII MG w/ Meguiars Foam Polishing pad w/ PC 7424

3) Collinite 845 w/ Meguiars Foam Finishing pad w/ PC 7424 (lowest speed)



I am very happy with this setup, although it didnt take out 100% of the scratches on the hood, I wasnt going to try mostly because there wasnt much clear coat left in areas. The rest of the car is pretty much 100% free of swirls. Interior pictures won't be included, because I forgot to take pics of the interior before I cleaned it up, but just imagine a smokers car, that was probably the hardest part of the car.
 
Great job!

I find that i have the swirls shown in the picture of the passenger side front fender, rite where the sun is reflecting. Did these type of swirls come out ok all over the car?

Thanks
 
Great job!

I find that i have the swirls shown in the picture of the passenger side front fender, rite where the sun is reflecting. Did these type of swirls come out ok all over the car?

Thanks
 
ryeh2o said:
Great job!

I find that i have the swirls shown in the picture of the passenger side front fender, rite where the sun is reflecting. Did these type of swirls come out ok all over the car?

Thanks
Click to expand...

Oh, they came out right away with just a pass or two of the 3M RC. Here is a picture showing the difference from the original paint condition on the passenger Quarter Panel and 1 pass with the 3M PII RC at a higher speed:



771f8f0d.jpg




As you see, the lower part of the Quarter Panel hasn't seen any Rubbing Compound, the difference is huge. So no, that isnt dirt below that fine line, the car has already been washed down, those are all scratches. Amazing, huh.
 
ryeh2o said:
Great job!

I find that i have the swirls shown in the picture of the passenger side front fender, rite where the sun is reflecting. Did these type of swirls come out ok all over the car?

Thanks
Click to expand...

Oh, they came out right away with just a pass or two of the 3M RC. Here is a picture showing the difference from the original paint condition on the passenger Quarter Panel and 1 pass with the 3M PII RC at a higher speed:



771f8f0d.jpg




As you see, the lower part of the Quarter Panel hasn't seen any Rubbing Compound, the difference is huge. So no, that isnt dirt below that fine line, the car has already been washed down, those are all scratches. Amazing, huh.
 
Nice job. I was under the impression that Toyota black was all single stage. Has that changed in recent times?
 
Nice job. I was under the impression that Toyota black was all single stage. Has that changed in recent times?
 
ben54 said:
Nice job. I was under the impression that Toyota black was all single stage. Has that changed in recent times?
Click to expand...

I would seriously doubt they are still on single-stage. I know this is 2-stage, mainly because parts on the door handles are flat black since the clear coat is all chipped off.
 
ben54 said:
Nice job. I was under the impression that Toyota black was all single stage. Has that changed in recent times?
Click to expand...

I would seriously doubt they are still on single-stage. I know this is 2-stage, mainly because parts on the door handles are flat black since the clear coat is all chipped off.
 
You must log in or register to reply here.
Back
Top