Swirls in clear bra...How to remove?

FWIW, I use Menz 106FA with a white pad via Metabo rotary, low rpms, very little pressure and keep the machine moving--a bit faster than you would move it on paint.



I think this would be a good combo via PC as well. Believe I just saw a "click and brag" on here and 205 was used via PC to work on rear stone guards of a Porsche.



My goal on the clear bra is improvement rather than perfection. :lol



HTH
 
I've used M205 and ZPC with a PC on an LC white polishing pad. ZPC gave me better results but M205 does work, but probably on a finishing pad rather than a polishing pad.
 
I've had the best luck with M205 and a foam hand pad. I have used a finishing pad and M205 in the past but prefer the safety of working by hand on film.
 
I wouldn't use a white pad on them, I've had great success many times with a rotary, black pad and some Menz FPII with low rpms and faster movements. Just don't let it heat up much.



Not always 100% either, but good enough to look greatly improved.



Josh
 
You must log in or register to reply here.
Back
Top