Suggested use for PC white pad?

[FlyNavy]

Well, I broke down and got the PC from Coastal. I have some pads on order from TOL. Meanwhile, what is an appropriate use for the white pad that comes with the PC? E.g. -- is it good for light polishing (#9) or what?

 

[gnahc79]

I use it with Autoglym glass polish. Have fun with the PC!

 

[CharlesW]

For a little over a year, I have used the white screw on pad for Meg's #9. No problems, just a nuisance to change. I also bought a Meg's velcro backing plate and several Meguiar's pads.



Charles

 

[bigpoppa]

I use it with 3M SMR and that's about it. I don't like it for GEPC or PPCL, I prefer to do those by hand.

 

[SK2003TypeS]

It's fine for light polishing. I've used #9 and Pinnacle PCL with it at speeds 3 1/2 to 4.

 

[FlyNavy]

Thanks for the replies. I guess I will see what the #9 can do on some very very light swirls on my Torch Red Z06. I thought it might be a good idea to start with a mild product for the first go-around.

 

[togwt]

*White pads, light cutting, speed 3.5 - 4.5 used for - Polishing, SMR, Resin Polish, Paintwork Cleaner, and Wax application, use white pads to apply one-step products like Klasse All-In-One.



*refers to Durofoam Variable Contact Pads (DVC) by Lake Country Manufacturing 6.5 Pad Size

Hope this helps.../



Experience unshared; is knowledge wasted…/



justadumbarchitect

 

[Preachers Sheets]

I never use it, too weak for a polish and too harsh for a wax. I use the yellow and blacks pads.