Anthony O.
New member
It's been awhile so I figured I would post up some recent works I have had the pleasure of performing.
This particular client wanted his Porsche 993 TT gone over for a concours event and while it really only needed a good washing and I'm sure it would of been just fine but my client wanted the paint gone over, wheels removed (even though they don't judge that area) and we also opted to remove and replace the paint protection film on the rear quarter panels.
I was in charge of the wheel wells, interior and also some of the last step paint prep.
Ron tackled the polishing work with rotary and dynabrade.
We used Victoria's Concours as our LSP and we'll visit the car once more for a 2nd coat a day or 2 before the show.
This is the condition of the wheel wells before. Not too bad eh?
I used Optimum's PowerClean to loosen up the light dirt film then used my steam vapor cleaner to melt away the grime. Klasse AIO was used on the painted areas and Protectant+ to dress the areas out.
This stage is the last rotary step and just before the dynabrade step. I hand applied Victoria's cleansing lotion while Ron followed with a hand application of Victoria's Concours.
Here it is finished.
This is a 1995 Guards Red Carrera that only need a light re-working, mainly on the exterior, as I had just detailed it about 3 months ago. It was given a 2 step polish with the rotary and dynabrade attachment with Optimum 50/50 (105 and OP) and FPII on a 100ppi pad.
We then applied 2 coats of Trade Secret paste wax to ensure full coverage. Again this was only an exterior detail with a vacuum and interior wipe down.
Enjoy the pictures,
More To Follow...........
This particular client wanted his Porsche 993 TT gone over for a concours event and while it really only needed a good washing and I'm sure it would of been just fine but my client wanted the paint gone over, wheels removed (even though they don't judge that area) and we also opted to remove and replace the paint protection film on the rear quarter panels.
I was in charge of the wheel wells, interior and also some of the last step paint prep.
Ron tackled the polishing work with rotary and dynabrade.
We used Victoria's Concours as our LSP and we'll visit the car once more for a 2nd coat a day or 2 before the show.
This is the condition of the wheel wells before. Not too bad eh?


I used Optimum's PowerClean to loosen up the light dirt film then used my steam vapor cleaner to melt away the grime. Klasse AIO was used on the painted areas and Protectant+ to dress the areas out.


This stage is the last rotary step and just before the dynabrade step. I hand applied Victoria's cleansing lotion while Ron followed with a hand application of Victoria's Concours.


Here it is finished.




This is a 1995 Guards Red Carrera that only need a light re-working, mainly on the exterior, as I had just detailed it about 3 months ago. It was given a 2 step polish with the rotary and dynabrade attachment with Optimum 50/50 (105 and OP) and FPII on a 100ppi pad.
We then applied 2 coats of Trade Secret paste wax to ensure full coverage. Again this was only an exterior detail with a vacuum and interior wipe down.
Enjoy the pictures,







More To Follow...........