Smart people needed

I

imported_Tom

New member
I just tried out my new 5 1/4" pads (pc) and they 'seem' to be the perfect match. Now this is all subjective but: the machine seems to have more power under pressure and the throw -seems- to be different. Could the smaller 'mass' of these pads have some real effect??
 
On a DA machine, with smaller pads, you have less surface area, therefor less resistance and more power. You have to be careful with *certain* 4" pad/polish combos on the PC, with certain paints, as I know some people that have burned paint. This is why some people claim that when using the PC for correction, 4" pads are the only way to go.

I like the 5.25" pads, because the pressure is more evenly distributed since the backing plate covers the majority of the back of it.
 
Tom said:
I just tried out my new 5 1/4" pads (pc) and they 'seem' to be the perfect match. Now this is all subjective but: the machine seems to have more power under pressure and the throw -seems- to be different. Could the smaller 'mass' of these pads have some real effect??
Click to expand...

A smaller pad on the PC is going to act more aggressive as it decreases the surface area of the pad (less friction or 'grip' on the paint) allowing the machine to operate at a higher speed. With a PC/G110 power is really the limiting factor, and by focusing that power over a smaller, more concentrated area, you effectively increase the working action.

You will notice the pad will spin faster and the machine may oscillate closer to it's no-load rating. The throw is going to be the same distance regardless as it is a mechanical function of the machine.

I'm glad you are enjoying the smaller pad's with the PC :D
 
I started using a PC about 3 years ago with 6.5" pads. When I switched to 5.5" pads, I never went back. Better cut, faster action. And, as an added bonus..... CHEAPER!!!

I'm stocked up on 5.5's. Love 'em!:thumbup:
 
Luster said:
I started using a PC about 3 years ago with 6.5" pads. When I switched to 5.5" pads, I never went back. Better cut, faster action. And, as an added bonus..... CHEAPER!!!

I'm stocked up on 5.5's. Love 'em!:thumbup:
Click to expand...

So, what you're saying is get 5.5's if you want more cut with the PC or...get the Flex since you have loads of brand new 6.5 & 7.5 pads and don't want them to go to waste?:out::D
 
ivopivo, I ordered the ccs and they are wonderful; as Luster I will not go back to the larger/thicker pads and I don't think anyone else who tries the fivers will every go back either, and the price advantage is very significant.

Thanks all, I didn't -think- it was all in my mind.
 
5" Balancing weight on a PC kit purchase from CMA.

The PC kit I purchased from CMA came with 6.5" flex backplate and pads.
However, when I looked at the balancing weight it says to use with 5" pads only.
Do I have to purchase the correct weight, which in this case would be for 6" pads? I am not sure if the 5" weight is close enough so that is why CMA shipped it installed already on the PC.
At times I do get lots of vibration, but I don't know if it is normal or because of the wrong weight.
 
mrtonyn said:
The PC kit I purchased from CMA came with 6.5" flex backplate and pads.
However, when I looked at the balancing weight it says to use with 5" pads only.
Do I have to purchase the correct weight, which in this case would be for 6" pads? I am not sure if the 5" weight is close enough so that is why CMA shipped it installed already on the PC.
At times I do get lots of vibration, but I don't know if it is normal or because of the wrong weight.
Click to expand...

Don't worry about that, it's been stated many times online, by myself and others, that you don't notice a difference in vibration using different counter weights on the PC
 
Ivan the best place to buy the pads, or anything else for that matter, is right here at proper auto- select the SHOP button up top then the car buffers/polishers tab, then select the dual action link, you'll see the pad I got under the 5 1/4 CCS section.

I have stopped checking pricing at other sites for similar items-CMA is ALWAYS either the exact same price as the cheapest site, or on more than a few occassions about 5% LESS than the 'best' price elsewhere.

Buy just one package of two and see for yourself, what have you got to lose?:smile:
 
Tom said:
Ivan the best place to buy the pads, or anything else for that matter, is right here at proper auto- select the SHOP button up top then the car buffers/polishers tab, then select the dual action link, you'll see the pad I got under the 5 1/4 CCS section.

I have stopped checking pricing at other sites for similar items-CMA is ALWAYS either the exact same price as the cheapest site, or on more than a few occassions about 5% LESS than the 'best' price elsewhere.

Buy just one package of two and see for yourself, what have you got to lose?:smile:
Click to expand...

I don't see flat pads... can you post a link?
 
weekendwarrior said:
On a DA machine, with smaller pads, you have less surface area, therefor less resistance and more power. You have to be careful with *certain* 4" pad/polish combos on the PC, with certain paints, as I know some people that have burned paint. This is why some people claim that when using the PC for correction, 4" pads are the only way to go.

I like the 5.25" pads, because the pressure is more evenly distributed since the backing plate covers the majority of the back of it.
Click to expand...

I've definitely created heat with the 4" pads on PC. No burning yet. The work well for correction, that's for sure.
 
Ivan, sorry for the confusion on my part-I failed to recongnize that you specifcally posted a question about 5.5 -flat- pads. I am using the 5 1/4 inch ccs pads bought here, what are 'flat' pads and how do they differ from conventional ones?

:confused:
 
You must log in or register to reply here.
Back
Top