S and W problem/question

[GregCavi]

Hello everyone

I bought s and w a while back and have used it a little bit. I have used it in my garage when the temps are a little cold. I usually spray it on and then wipe off. the problem is that is seems to like haze and then be really hard to take off. Another thing that happens is that is leaves the image of my wipe in my paint. IM just wondering when it warms up will this not be a problem?

Thanks

Greg

 

[CharlesW]

Greg:
The problem is most likely the temperature. I have fairly decent results at 40+ and great results at 50+.
One other thing that might be a problem is using too much product.

Charles

 

[GregCavi]

Greg:
The problem is most likely the temperature. I have fairly decent results at 40+ and great results at 50+.
One other thing that might be a problem is using too much product.

Charles

I tried my adams DS today that had the same image on the paint thing and it didnt do it at (55 or so). I imagine the S and W will be fine

Any one else had these problems?

Greg

 

[wifehatescar]

I have had similar problems with many QD's in cold weather. They don't evaporate as fast. It's the nature of the beast I suppose.

 

[91LSMAN]

I have had similar problems with many QD's in cold weather. They don't evaporate as fast. It's the nature of the beast I suppose.

Yeah, cold weather sucks for QDs and similiar products.

 

[the caveman]

You shouldnt have a problem with spray and wipe. I use it all the time in cold,hot,warm,cool, weather it doesnt matter. Is your mf completly dry and how do you wash your mf's. That might be the problem. Make sure you dont spray to much on and wipe it all up 100 percent with a new mf (not washed in the laundry) and your problem should be gone. If none of that is it then you are still doing something wrong.