alexxxx89
New member
I need some definitive yay/nay clarification. Working with: Meg's GV110v2, with white, black, and blue CCS pads. I also have Meg's UC and klasse twins (and collinite 845).
I have two issues:
1. The hood on my 03 Accord looks like it was peppered by birdshot, with most of the chips down into the primer (chalk it up to soft CC and thin paint right?). Getting the time to detail the exterior is difficult enough, so I don't really have an interest in repairing each one (if you have little ones you understand). Ill provide pictures shortly.
With that, will polishing with KAIO and the white CCS pad damage anything? Will the KSG and 845 protect enough to prevent the chips from growing or rusting? I have rust inhibitor, but that is almost as trying to apply (from a rattle can) as touch-up. Also, there are some serious defects on the doors and bumpers that are surrounded by pristine paint. Can I mitigate the abrasiveness of the UC by applying with a white CCS pad (in a slowly but surely approach)?
2. Another vehicle of my household is an 07 Mitsu Endeavor, who's paint has seen better days. The front bumper is bug-stained (pics later) so that no amount of claying has provided relief. The hood took a hit from a falling basketball hoop, which left a huge scrape down to the primer and a big chunk down to the steel (which I taped up and covered with rust inhibitor short of any other low-cost options).
So, is the application of Meg's UC, followed by KAIO (white pad), KSG (by hand with a MF applicator), and 845 (with a blue pad) going to get the job done, or am I missing something?(like Meg's ult polish before KAIO?)
Thanks for any input guys
:autopia:
I have two issues:
1. The hood on my 03 Accord looks like it was peppered by birdshot, with most of the chips down into the primer (chalk it up to soft CC and thin paint right?). Getting the time to detail the exterior is difficult enough, so I don't really have an interest in repairing each one (if you have little ones you understand). Ill provide pictures shortly.
With that, will polishing with KAIO and the white CCS pad damage anything? Will the KSG and 845 protect enough to prevent the chips from growing or rusting? I have rust inhibitor, but that is almost as trying to apply (from a rattle can) as touch-up. Also, there are some serious defects on the doors and bumpers that are surrounded by pristine paint. Can I mitigate the abrasiveness of the UC by applying with a white CCS pad (in a slowly but surely approach)?
2. Another vehicle of my household is an 07 Mitsu Endeavor, who's paint has seen better days. The front bumper is bug-stained (pics later) so that no amount of claying has provided relief. The hood took a hit from a falling basketball hoop, which left a huge scrape down to the primer and a big chunk down to the steel (which I taped up and covered with rust inhibitor short of any other low-cost options).
So, is the application of Meg's UC, followed by KAIO (white pad), KSG (by hand with a MF applicator), and 845 (with a blue pad) going to get the job done, or am I missing something?(like Meg's ult polish before KAIO?)
Thanks for any input guys
:autopia:
