Rigid WD4050 Attachment question

[PhaRO]

I have the WD4050 and use the car nozzle. Seems in the store they have the smaller 1-1/4 and larger 2-1/2. I'd like to get a new nozzle but unsure where you get it from.

 

[BigAl3]

check this out and if you find what you want, go to home depot and you can buy some of the accessories separate or as a pack (like below, but make sure that it is compatible with your vac).... click on "wet/dry vacs" on the upper right corner...Welcome to RIDGIDParts.com

 

[Oreilly907]

If you pick up the commercial hose (Model VT2570) you can use the 1 7/8" accessories or your 2 1/2" ones that most of us have a ton of. Also, the hose is more managable than the O.E. hose. ... just another option. Good luck.

 

[justin30513]

There is a 1 7/8 kit that is there with the rest of the attachment kits underneath the vacs. It's 19.00. It's all that will fit this wonderful vacuum.



It's in a long cardboard box.

 

[BlackElantraGT]

I bought a Rigid car nozzle to use with my 1.25" shopvac and that was a no go. I didn't realize the rigids are 1 7/8". I really wish Shopvac had a nozzle like this as I find that the "guzzler" nozzle is sometimes too big in certain areas of the interior.