It's very difficult to not put swirls into the paint or micro scratches when doing a 50/50 wipe down of a black car, especially one with soft paint. What is the best method of doing a 50/50 wipe down? Do you spritz each panel with the solution and then wipe it down with a microfiber? Or do you spray the 50/50 directly on the microfiber and go over each panel like that? I'm trying to do this as carefully as possible as I don't want to cancel out the compound and polish that I just completed.
Proper way of doing a 50/50 IPA wipe down on a black car?
- Thread starter JJH
- Start date
Rocket
New member
Maybe you should try Carpro Eraser. I think it's less grabby compared to IPA. I think this might help reduce the risk of marring.
I always spray the panel with IPA but maybe try spraying the towel too. Maybe it will make it glide across the panel a little better. It might be worth a try.
I always spray the panel with IPA but maybe try spraying the towel too. Maybe it will make it glide across the panel a little better. It might be worth a try.
Bunky
Detailing Gnosis
I have tried the idea of mixing IPA (use 20% concentration) with a little ONR (1/4 ounce) to reduce the grabbiness. It did seem to work.
Doesn't it still leave water spots and blotches for you?
Orinda Auto Detail
Opti Coat Pro Certified
I spray the towel directly and use a silicon free QD spray on the section im gonna wipe, then pat dry with clean mf and it always seem to work for me. Another thing I do sometimes if it's really finicy paint is foam it down with a heavy nutral PH soap the while its foamed spray IPA(full strength over a panel at a time) Wash and rinse as I go
Wheelzntoys
New member
E are some threads with this mix, better than ONR mix. Looks like it works good for those that use it.
Rwright post:
In a 32oz bottle of a 25% IPA/distilled water solution, I simply added 1/2oz of D114
Rwright post:
In a 32oz bottle of a 25% IPA/distilled water solution, I simply added 1/2oz of D114