Prima compound/polishes

No, it's not. On "medium" colors (grays,etc) I find it finishes LSP ready with white LC pads (rotary). My main experience with it is on Japanese metallics. I haven't used it on my black Porsche, though I recall one poster on here comparing it favorably to Menz IP/SIP in finishing ability and preferring it a bit because of the dusting.



I've seen other Prima products reviewed here too (Amigo etc) and these too were favorable.



HTH
 
landcruiser said:
No, it's not. On "medium" colors (grays,etc) I find it finishes LSP ready with white LC pads (rotary). My main experience with it is on Japanese metallics. I haven't used it on my black Porsche, though I recall one poster on here comparing it favorably to Menz IP/SIP in finishing ability and preferring it a bit because of the dusting.



I've seen other Prima products reviewed here too (Amigo etc) and these too were favorable.



HTH
Click to expand...





THANKS! Just the info I was looking for!!:thx
 
landcruiser said:
No, it's not. On "medium" colors (grays,etc) I find it finishes LSP ready with white LC pads (rotary). My main experience with it is on Japanese metallics. I haven't used it on my black Porsche, though I recall one poster on here comparing it favorably to Menz IP/SIP in finishing ability and preferring it a bit because of the dusting.



I've seen other Prima products reviewed here too (Amigo etc) and these too were favorable.



HTH
Click to expand...



You should always finish with a softer pad with a rotary. The new Gold LC pad would be perfect.
 
wannafbody said:
I've read good reviews of the swirl remover.
Click to expand...



POPPAJ said:
Is it as finicky as Menz, dusting?
Click to expand...



wannafbody said:
You should always finish with a softer pad with a rotary. The new Gold LC pad would be perfect.
Click to expand...



The white LC pads finish nice for me with some products via Metabo (106FF or FA for example). Haven't tried the gold pads though. Do you prefer them to the black, blue or red LC pads for that final "jeweling"?



Again, I'm talking about some of the lighter metallics which don't show every little flaw like darker--especially black--colors do. Of course YMMV, I'm merely commenting on my personal experience with this one Prima product and how I've found it to compare with Menzerna IP/SIP. My preference is Menzerna,but others may not like it.



I think the OP was primarily interested in some observations/experience with the product and comments on dusting?

:xyxthumbs
 
Prima Swirl is my goto polish, use it with the PC and orange LC pad, follow with a white LC pad on some hard clear, on my Accord I used it with a white LC pad, followed up with Prima Finish on a black LC pad. Great products, showcardetailing has a lot of Prima info
 
They make great products. Their polishes are very high quality and actually were designed for the PC. I have their entire line of products as they are local to me and they are all great. The cut is REALLY aggressive and will take out some really nasty imperfections. swirl is an a lot like SIP but without much dusting, it does finish down LSP ready but I always go down to their fine when finishing and I think if you ask nicely you might be able to geta sample of their "soft" which is a super fine much like FPII.
 
You must log in or register to reply here.
Back
Top