Redwings97
New member
This is a 2005 Toyota Tundra – was purchased from an auction – this was used in construction. This truck had some scratches and scuffs. Contamination was pretty bad. Here we go
Wash PB’s SS&S – 2 bucket method
Wheels – PB’s S&R on inside of rims – P21 gel cleaner on outside
Wheel well sprayed with PB’s APC 10:1 and BS
PB’s clay using PB’s S&W mixed 50:50 with water
Tires and wells – PB’s B&B
Interior
Vacuum with shop vac –
Mats were hosed off for a long time – saturated with PB’s APC 10:1 – scrubbed with PC and green carpet brush and then hosed off with strong stream of water. Excess water was removed by the LGM. The mats I have to say came out great.
Carpets and seats were spot cleaned using PB’s APC 10:1 and the LGM
Interior dash and door panels – PB’s NL
Polishing –
Hood, passenger qtr panel and tailgate
PB’s SSR 2.5 with CCS orange pad and Flex
PB’s SSR 1 with CCS white pad and Flex
Bottom part of tailgate – PC and 4” pads both SSR.2.5 and SSR 1
Top of the truck
PB’s PwC Blue with CCS white pad and PC
Rest of truck
PB’s SSR 2.5 mixed with PWC blue with CCS white pad and Flex
Chrome mirrors, front fender and rear bumper
PWC Blue with MF towel
LSP = 4* UPP – 1 coat
Wash bucket and correction - the correction photos do not show really well, but definitely made an improvement. They showed better on the camera.
Wash PB’s SS&S – 2 bucket method
Wheels – PB’s S&R on inside of rims – P21 gel cleaner on outside
Wheel well sprayed with PB’s APC 10:1 and BS
PB’s clay using PB’s S&W mixed 50:50 with water
Tires and wells – PB’s B&B
Interior
Vacuum with shop vac –
Mats were hosed off for a long time – saturated with PB’s APC 10:1 – scrubbed with PC and green carpet brush and then hosed off with strong stream of water. Excess water was removed by the LGM. The mats I have to say came out great.
Carpets and seats were spot cleaned using PB’s APC 10:1 and the LGM
Interior dash and door panels – PB’s NL
Polishing –
Hood, passenger qtr panel and tailgate
PB’s SSR 2.5 with CCS orange pad and Flex
PB’s SSR 1 with CCS white pad and Flex
Bottom part of tailgate – PC and 4” pads both SSR.2.5 and SSR 1
Top of the truck
PB’s PwC Blue with CCS white pad and PC
Rest of truck
PB’s SSR 2.5 mixed with PWC blue with CCS white pad and Flex
Chrome mirrors, front fender and rear bumper
PWC Blue with MF towel
LSP = 4* UPP – 1 coat
Wash bucket and correction - the correction photos do not show really well, but definitely made an improvement. They showed better on the camera.
