pc am i missing parts??

[imported_steveo3002]

i got a pc today, the $189 sonus kit form autopia, i read somewhere that the counterweights should be changed depending on size of pads



i only got one weight that came fixed on the pc....should i have got spares included??

 

[zippymbr]

The PC does not come with spares. You can buy them at most places that sell the PC. Like here: http://www.autogeek.net/pccw.html. I have the 6 inch counterweight installed and have very little vib. using 5 or 6 inch backing plates

 

[imported_steveo3002]

okay thanks

 

[3Dog]

I have three PC's....one with 2 7/8 in pad, one with 5 in pad and one with 6 in pad, I have never changed a counterweight.

 

[Accumulator]

Porter Cable parts dept: 800 848-5175

6" counterweight pn: 699933



Don't remember what it costs but it isn't much, a few bucks.

 

[tyusaf]

You should check the counterweight that comes with the PC - when I purchased mine a few weeks ago, it came pre-installed with the 6" counter weight... should be marked clearly on the weight ("for 6" pads only") - or something like that...



--Tosh

 

[ShaggonWaggon]

I just got my hands on a PC to for the first time. I found that when I took the side handle off the vibrations were reduced considerably. :buffing:

 

[imported_Neothin]

I don't think that you screwed your handle in enough then... I hardly notice a difference with the handle on or off (besides being akward to hold w/o the handle of course)

 

[Accumulator]

Neothin- Nah, some of us do notice a big drop in vibration without the handle (and yeah, I was screwing it in all the way ). There's some proper explanation for it, regarding transmission of vibration from the source via a tangential appendage or something like that and it being exacerbated by the handle being hollow rather than solid, but I forget the specifics.



As to it being awkward, I suppose that it's just a matter of personal preference and getting used to it one way or the other.

 

[3Dog]

Neothin- Nah, some of us do notice a big drop in vibration without the handle (and yeah, I was screwing it in all the way ). There's some proper explanation for it, regarding transmission of vibration from the source via a tangential appendage or something like that and it being exacerbated by the handle being hollow rather than solid, but I forget the specifics.



As to it being awkward, I suppose that it's just a matter of personal preference and getting used to it one way or the other.

So thats what all those handles are for I have laying around!! :think2