Pb super slick & foam now out.

so many great products so little time. Mckee`s has been killing it and PoorBoy`s is always been stellar.Oh yeah and Griot`s has had quit a few new great products.
 
6249bfa164f08cfa35cc304df390191e.jpg
 
I`ll be interested to hear how this works for people.

Letting it dwell for ~5min. without letting it dry might be a challenge for some folks.
 
Re: Pb super slick & foam now out.

Accumulator said:
I`ll be interested to hear how this works for people.

Letting it dwell for ~5min. without letting it dry might be a challenge for some folks.
Click to expand...
same as any iron remover
you have to allow time for chemical reaction
 
Re: Pb super slick & foam now out.

512detail said:
same as any iron remover
you have to allow time for chemical reaction
Click to expand...

Well...yeah...(thinking about ValuGard`s "B" and the FK stuff which have vto dwell for ages and *really* shouldn`t be allowed to dry), but guys without controlled-environment shops say the "don`t let it dry" is a challenge for them. I`m not slamming it or anything, just thinking how people often want their shampoos to be idiot-proof and some people wash outside/etc.
 
Re: Pb super slick & foam now out.

Accumulator said:
Well...yeah...(thinking about ValuGard`s "B" and the FK stuff which have vto dwell for ages and *really* shouldn`t be allowed to dry), but guys without controlled-environment shops say the "don`t let it dry" is a challenge for them. I`m not slamming it or anything, just thinking how people often want their shampoos to be idiot-proof and some people wash outside/etc.
Click to expand...
yea letting it dry is always a concern for me as well, considering it has to dwell, i guess you could lubricate on top of it with foam gun/cannon but then you gotta worry about that drying too, lol
 
yes, there are a lot of people who now have Super Slick & Foam and Iron Remover in there hands :)

We tried our best to get it not to stink but it just couldn`t hold very long...

If used as a decontamination combo you really don`t have to worry about it drying ...

Spraying the Pre-Wash Foam on top of the Iron Remover give you quite a bit of dwell time and we tested it here in Florida while it was pretty hot !!
 
Poorboy said:
yes, there are a lot of people who now have Super Slick & Foam and Iron Remover in there hands :)

We tried our best to get it not to stink but it just couldn`t hold very long...

If used as a decontamination combo you really don`t have to worry about it drying ...

Spraying the Pre-Wash Foam on top of the Iron Remover give you quite a bit of dwell time and we tested it here in Florida while it was pretty hot !!
Click to expand...

I have seen this process done before by others too. Always an issue on darker cars or you have to do it panel by panel which takes a lonnngggg time. Does this process of spraying the iron removed then using foam over it reduce the iron removal properties of the product?
 
RaydiantDetail said:
I have seen this process done before by others too. Always an issue on darker cars or you have to do it panel by panel which takes a lonnngggg time. Does this process of spraying the iron removed then using foam over it reduce the iron removal properties of the product?
Click to expand...

We did whole vehicles .. the foam sprays on almost like insulation in an attic ... When testing we waited until the Iron Remover was completely activated and it looked like blood was running ...

we also lightly misted the first areas just to make sure they were not drying ... following with the Super Slick & Foam , then a regular 2 bucket wash and the test vehicles were smooth and clean.
 
Poorboy said:
If used as a decontamination combo you really don`t have to worry about it drying ...

Spraying the Pre-Wash Foam on top of the Iron Remover give you quite a bit of dwell time and we tested it here in Florida while it was pretty hot !!
Click to expand...
Nice that they work well together, at least for those doing The Big Detail.
 
You must log in or register to reply here.
Back
Top