Park Avenue Detailing: Ford Mustang Mach1

G

gtpaul

New member
Process:



SIP via Orange CCS with Flex Speed 6

FF via Red CCS with Flex Speed 6

Pinnacle Souveran by hand



Mach1001.jpg


Mach1003.jpg


Mach1009.jpg


Mach1010.jpg


Mach1011.jpg


Mach1012.jpg


Mach1013.jpg


Mach1017.jpg


Mach1023.jpg


Mach1024.jpg


Mach1026.jpg


Mach1028.jpg


Mach1029.jpg


Mach1030.jpg


Mach1032.jpg


Mach1035.jpg


Mach1040.jpg


Mach1045.jpg


Mach1048.jpg
 
Wow awesome job. Anyone who lets a Mach1 get into that condition should be shot. Great correction.



ajnavo61490 said:
nice job



not a mach 1 tho, its a v6 stang with a mach 1 tag...
Click to expand...





Looks like a mach1 to me. Shaker hood, matte strip and wing. The only thing questionable is the 40th anniv emblems..as mach1s come with the ponys.
 
evenflow said:
Wow awesome job. Anyone who lets a Mach1 get into that condition should be shot. Great correction.









Looks like a mach1 to me. Shaker hood, matte strip and wing. The only thing questionable is the 40th anniv emblems..as mach1s come with the ponys.
Click to expand...



what he said:). The car looks great though!
 
Nice job and that is a Mach 1. It has the right exhaust, chin spoiler, striping, hood w/shaker, wheels, everything is right on it. IIRC the 40th emlbems could come on ANY 2004 Mustang, and the Mach 1 was produced in '03 and '04 so those emblems are likely stock as well. Why wouldn't it be a Mach 1?



Again, very nice job on the detail, that thing was nasty.
 
gtpaul said:
No guys your all wrong its a V6.:har:
Click to expand...

Agreed. Just a very convincing fake. Look at the suspension on that thing. Looks like it's ready for off-roading. Always the easiest way to spot a fake since most Mustang owners tend to think their cars don't need suspension modifications. That exhaust is hanging really low too, tell tale sign of an aftermarket installer.
 
I seriously think thats a mach 1. What are the differences? The ride height on that thing just looks like any other mach 1 that Ive seen and so is the front bumper.



Front bumper of a stock mach 1







stock height







exhaust hangs the same height





what am I missing here??
 
ajnavo61490 said:
nice job



not a mach 1 tho, its a v6 stang with a mach 1 tag...
Click to expand...



Chris330Ci said:
Agreed. Just a very convincing fake. Look at the suspension on that thing. Looks like it's ready for off-roading. Always the easiest way to spot a fake since most Mustang owners tend to think their cars don't need suspension modifications. That exhaust is hanging really low too, tell tale sign of an aftermarket installer.
Click to expand...



I really don't know WTH ya'll are smoking.



The car is a 2004 Mach 1; black...



The 40th anniv. badges were standard an ALL production Mustangs in 2004; EXCEPT for the Cobra.



Note that the Shaker hood; 13" front brakes with PBR calipers; rocker stripes and matte black rear spoiler; along with 3" rolled edge exhaust tips were all part of the Mach1 package. The chin spoiler; wheels and C-panel sails are also unique to the car. The Cpanels are cut at a harder angle to align harder with the door scoop angle and were originally created for the 2001 Bullitt model.



The Mach only sat marginally lower than a standard production GT as well.



As far as the exhaust "hanging low"; keep in mind that the exhaust exits fairly straight and parallel to the ground; whereas the rear bumper cover/valance is quite rounded and actually upswept a bit at the bottom; causing your eye to perceive the exhaust to be pointed down when it in fact isn't.



Get your facts straight before calling a real Mach a "fake".



EDIT: BTW; I'm sure you're kidding GTPaul :grinno:
 
You must log in or register to reply here.
Back
Top