One step on a Pontiac G6

B

BumbleBeeGTO

New member
Hey guys, I am trying to think of the best way to achieve good results on a black G6 by doing a 1 step. I'm not making enough, or have the time to do a 2 or 3 step on it. I am going to use the PC since my friend has the rotary, and I have M105, SIP and FPII. I have orange, yellow, white, and a blue pad to use. What would you guys hit it with?



I'm thinking SIP on the white pad. Or if I could use FPII on an orange pad or something? (only because I don't want to run out of SIP or M105)
 
you might actually get some pretty good results with SIP on a white pad.



I would probably go that route as something like M105 would require another step or two after it for the paint to be where it needs to be.



So my answer: SIP w/White Pad
 
I did my car with SIP on a white pad for a touch up and it came out great, but this car has never been done before and it is black. Guess I'll try it. Any other tips from anyone?
 
Well... I just did the first panel of the car and it did not turn out good. I got about 60% correction. On to SIP with course green pad. I just hope I don't have to do a 2 step to get rid of trails...
 
You must log in or register to reply here.
Back
Top