NXT paste wax..how long to let it dry?

[tommyortom]

about how long are you supposed to let NXT paste wax sit before buffing it off?

 

[DrSauekraut]

Allow to haze . . . then buff clean. Depending on temperature and humidity, I’d say 10 to 15 minutes.

 

[chrisx]

Swipe a small section with your finger and if it comes off leaving no streaks then it is ok to remove, if it leaves streaks or it feels wet then leave it longer.

 

[Scottwax]

I've found that when applying it via PC with a finishing pad, it is ready to remove once you have finished applying it to the whole car. Seems to haze and be ready for removal more quickly than the liquid version.

 

[imported_Neothin]

when i used nxt liquid, i applied it to the whole car and then went and did the windows. afterwards i would buff off the nxt. never had a problem with removal.

 

[beastie]

I too applied to the whole car then buffed in the same order I applied. About 15 minutes drying time.

 

[Don]

I start application on the hood, work counter-clockwise around the car and by the time I reach the hood again, it's ready to remove.