New 2008 accord coupe black on black.

J

jnguyen

New member
Well being this is my first post I thought I would introduce myself. I recently bought a 2008 accord coupe black on black and to my surprise it came with a few free "fine" swirls courtesy of the dealer. I've had the car for about two weeks before I gave it it's first wash and "detail" which consisted of gold class car wash, zymol cleaner wax, and NXT carnuba. I thought I was in good shape till I stumbled upon Autopia and I know feel like I'm in the dark with what to do and what to use.



My primary goals being that it is a new car with fresh new paint is to first remove all the fine swirls and to give the car a good layer of protection as well as a great look and finish. After the reading the forums for a couple of days I think I've concluded what I need but I do need help on deciding which brands to go with. Here's the list of what I think I need and please add on to it if you feel that I missed something.



1) PC

2) LC CCS pads ( Not sure which ones to get for just light polishing and finishing, recommendations please)

3) Cleaner wax?

4)Fine polish



And I'm pretty much lost after that. Do I need a glaze? a sealant? even carnuba?



Thanks in advance to anyone who reads this long post and helps out.

Regards,

John
 
well if you are just buying a pc u should instead purchase a udm(more powerful like $10 more)



i would buy a orange or 2, a white or 2, a gray and a blue/red.

you might be able to do the car with one pad but to be safe i always change pads mid way in case they are getting filled with product(not breaking the polish down very well).

correct me if you suggest other wise



u also probably need polish and things like that. most recommend the menzerna range but that is expensive. u could also just pick up #80 and #83.



u really dont need a cleaner wax i would purchase a good glaze like cg ez cream glaze or cg wet mirror glaze (never tried wet mirror but i hear its good).



then id pick up a lsp that suits what YOU like and how often you maintain your lsp your car.
 
Wet Mirror Glaze from Chemical Guys is very good...very...i wish i could find a carnauba with reflection..that would be a great combo..every carnauba i use is deep and warm..but more wet than reflective...obviously though



I would actually pick up #80 and #9..i have heard 83 is tricky on a DA...but definitely get a DA...like he said UDM...but i just purchased the G100 because of the lifetime warranty...you can take a gander at autodetailingsolutions.com
 
The best advice I can give you is to read a lot before you buy, don't fall for all the hype that on-line retailers use - every product they sell is the best and they all work fantastic. I've yet to see one product brand that was the "best" in all areas. For the money, Megs' Mirror Glaze line is hard to beat. Getting the paint polished and ready for a wax or sealant is way more important than what wax/sealant you use. Don't get enticed by unfamilier products that are only found on-line, commonly referred to as "boutique" products, these can run up your credit card faster than redneck at Walmart at Christmas Eve. Take time to use up something before jumping ship (I know it's tough - I'm quilty of that)



Congrats on the Accord, I just bought a 08 Accord sedan, v6 and basque red pearl, lovin it!
 
jnguyen said:
1) PC

2) LC CCS pads ( Not sure which ones to get for just light polishing and finishing, recommendations please)

3) Cleaner wax?

4)Fine polish



And I'm pretty much lost after that. Do I need a glaze? a sealant? even carnuba?



Thanks in advance to anyone who reads this long post and helps out.

Regards,

John
Click to expand...



I guess I wasted my time giving you advice the other night??:aww:
 
That was a great advice you have given him.:up, I was going to say the same and had added maybe using 6.5 pads for someone new and Z-5 with Z-CS if he wasn't going to use PGP
 
6.5's on the DA can be annoying and leave hazing for a beginner. The smaller pads vibrate less as well without being as aggressive as a 4".
 
Your right on that, i was thinking he might be better off with the larger ones so he have a little more protection from the backing plate hitting the finish on a car. I have seen some newbies who couldn't handle anything (no matter which size pad) from hopping around the finish of a car and all i could do was take it away and showing them how to use it properly. Bet if it's done right the finish on that Honda should be dipping wet and blind ones eye's in the sun. Great suggestion SpoiledMan :up
 
You must log in or register to reply here.
Back
Top