Need a little help.

[tabasco]

Can you guys take a look at these pics and give reccomendations for bringing the shine back. It is a 1990 Mazda Miata. Bod is in good shape, just faded. I do have a PC. I have an orange, white and black pads. SOme Sonus swirl remover, Klasse, some cleaner but nothing real strong as far as cutting. Where would you start?



Thanks,

Randy

 

[tabasco]

Should I have put this somewhere else?



No guidance? suggestions? please?



Thanks,

RE

 

[BobD]

You shouldn't need anything really strong for that. I would go with Red Moose Machine Glaze and top it with a good sealant. It will probably come back over time but for now that is what I would do.

 

[Eliot Ness]

Yeah, a good AIO type cleaner will do wonders on that. Below is a thread you might find interesting. The product he used was Klasse AIO:



http://autopia.org/forum/hall-fame/23482-behold-power-aio-lots-pictures.html



Unfortunately the pictures seem to have disappeared from that thread, but I found them on his website (it is the red Toyota truck):



Photos



Like Bob (Danase) mentioned, follow that up with a good sealant and that red Miata should really pop.

 

[MrAP]

I would use the Sonus you have first. Then maybe the glaze suggested above, or try the Klasse twins you have. Don't know if you can do the glaze over the twins.

 

[imported_themightytimmah]

This was Optimum Polish/orange pad followed by OP/white pad and Souveran

Pretty much any mild polish oughta do it.

 

[tabasco]

Thanks for the help. I will post more pics afterwards. May be a week or 2.