It depends on what affect your going for! (A really Brite Shine, Or a Deep matte shine)
I have a terry wax aplicator that I use just for NL and I will apply with this in small circular motions making sure to get even coverage. I will allow it to sit while im doing other things to the car... come back and buff one more time ..
If Im going for a high shine I will use a Foam wax aplicator the NL goes on a lot heavier. Again ... go back about an hr later and buff!
I love this stuff between the Smell and the Shine ... Im hooked!
Two things come to mind. 1) how clean was the dash? 2) Did you buff it rigth after with a MF towel to make it even...........Most of the time its from the area not being clean
Guys,
Thanks for the info. I had just cleaned the dash, but I may have missed a couple areas. I do like NL alot. I figured it was just technique or I missed something. BTW, what do you use to clean the dash on vehicles?
I buy a APC from a local dealer here that is citrus based.......About any good APC should work.........Just be careful on how strong it is so that you don't stain the plastic
I keep woolite and water in a sprayer all the time for cleaning leather....it works great and as I stated before most of the time I find streaking from an area not being cleaned right and not buffed out
When you clean with the woolite/water mix, do you rinse the area with clean water afterwards? Just wondering if the woolite/water mix leaves a soap residue if not rinsed. :dunno