Hmmm....I have read a about people waxing their car and then spritzing it with ice cold water and wiping it down again. Same principle maybe?
Nattys Liquid and Paste Layering Advice
- Thread starter 512detail
- Start date
Hmmm....I have read a about people waxing their car and then spritzing it with ice cold water and wiping it down again. Same principle maybe?
Ronkh
Wax Waster
A hair different, but same principle I guess
rlmccarty2000
Active member
Maybe the good Poorboys folks could weigh in on what the cold liquid does to increase shine? Changes the molecular structure of the carnuba? Maybe thins the coat of wax? Ive got to try it.
Poorboy
Founder Poorboy's World
I think Ron has more than enough experience with this .. he was there when these were introduced and tested in all sorts of ways with all different colored vehicles and even in 100+ degree heat on blacktop on a Black BMW that wasnt so easy to play with ...
Weve experimented on Street Rods with very expensive paint ...
heres some guidelines to consider ... if you spray first and then wax and then immediately wipe off, you will get the most out of the wax alone (deeper shine) and use less microfiber towels
if you wax and then spray you are getting more out of the Spray & Gloss (Brighter and Wetter) and will then need more towels and good absorbent ones ... (Your 1 DMT is in the wash???)
All towel are not created equally
I prefer not to let it dry, but again we tried letting it dry and it didnt make that much of a difference ... do what works best for you or just keep going ..lol
Ronkh
Wax Waster
In the last century, we used to wax car, remove, then let it bake in sun all day then hit it with cold hose water.
It shined like crazy. Wonder how many cars we cracked the paint on..........? :dunno:
It shined like crazy. Wonder how many cars we cracked the paint on..........? :dunno:
512detail
New member
I think Ron has more than enough experience with this .. he was there when these were introduced and tested in all sorts of ways with all different colored vehicles and even in 100+ degree heat on blacktop on a Black BMW that wasnt so easy to play with ...
Weve experimented on Street Rods with very expensive paint ...
heres some guidelines to consider ... if you spray first and then wax and then immediately wipe off, you will get the most out of the wax alone (deeper shine) and use less microfiber towels
if you wax and then spray you are getting more out of the Spray & Gloss (Brighter and Wetter) and will then need more towels and good absorbent ones ... (Your 1 DMT is in the wash???)
All towel are not created equally
I prefer not to let it dry, but again we tried letting it dry and it didnt make that much of a difference ... do what works best for you or just keep going ..lol
great info...and yes I only have 1 DMT and it was in the wash from using it a few days ago on my truck with the LNR. I recently bought just one and I really like it, I plan to buy more but I am trying to behave on the buying side right now. I definitely like the DMTs and will have more eventually just not right now. I generally will run through most of my towels and then do two medium sized loads instead of doing 5-6 towels here and there.
Im going to play around with this some more after work. Ron has struck my scientific side with this chilled S&G concept.
Ronkh
Wax Waster
1 dmt ?!?!?!?!?!?!?!?!?!?! 
Wow
Wow
512detail
New member
1 dmt ?!?!?!?!?!?!?!?!?!?!
Wow
back off! haha
thats 1 more than a lot of people
hell I have almost the entire Poorboys product line , however
youll have to pry my ultra plush cobras from my cold dead hands- love those towels
But yes I DO intend on getting more DMTs
Poorboy
Founder Poorboy's World
I bet he can eat one potato chip .. one doughnut hole, one french fry :rofl:rofl:rofl:rofl:rofl
Ronkh
Wax Waster
1 flag fun
512detail
New member
Ronkh
Wax Waster
512detail
New member
Topped with another nattys red paste
S&g chilled spritz on panel
Primed applicator of nattys red on top of damp panel
Curing now
Only doing above crease and hood/roof
S&g chilled spritz on panel
Primed applicator of nattys red on top of damp panel
Curing now
Only doing above crease and hood/roof
Ronkh
Wax Waster
Topped with another nattys red paste
S&g chilled spritz on panel
Primed applicator of nattys red on top of damp panel
Curing now
Only doing above crease and hood/roof
Let it sit long time.
512detail
New member
Uh oh it swipe tested around 25 mins so i removed it
512detail
New member
Guess i will have to do it again
Oh what a shame
Oh what a shame
Ronkh
Wax Waster
Ronkh
Wax Waster
Do same way if you are doing it now. So the SG will cut the solvent down.
Let it sit long time, then wipe off.
512detail
New member
You know I had to make you askPics required
745pm central and overcast
https://vimeo.com/164787411 video1
https://vimeo.com/164787475 video 2
Black hole
Nattys black x2 (applied 1 month ago)
Recently added
Nattys Blue then
Spray and Gloss wipedown
Nattys Red, removed, then chilled Spray and Gloss wipedown.
24 hours later I misted chilled Spray and Gloss and immediately applied Nattys Red
Took pics at 745pm with fading light
Ronkh
Wax Waster
<----- IMPRESSED !!!
Now thats some SHINE !!!
Now thats some SHINE !!!