Not a lengthy review - just my experience. I finally got a chance to use it last night on a black 08 Nissan Pathfinder. I will post some pics later so you can see the condition of the paintwork. It was pretty bad!
I primed the pad as directed. For the following passes i used 2 pea sized drop of the product. I used compressed air to keep the pads cleaned.
I was very impressed on how well it cut. As mentioned in other review it did not cut as much as 105/surbuf. It was very easy to wipe off and had no dusting. After cutting I inspected the paintwork under the LED's and halogens. I noticed a fair amount of micro-marring. Onto the Finishing Wax. Again I was impressed. After another close inspection I still had some micro-marring. I am going to chalk this up to user error(If i am wrong someone chime in).
I followed Megs instruction on 2-3 moderate pressure passes then 2-3 light pressure passes. I did find it difficult at times to slow down and let the product/pads work their magic(due to me being an impatient person). It was a dealer car so I wasn't too concerned with perfection. I just wanted to see what this kit can do.
Overall this system is user-friendly and produces great results.
IF this last part violates any rules please feel free to delete this part.....
When I ordered the kit from my supplier I did not pay attention and ended up ordering a case of 4 kits and 2 boxes(6ea.) of extra discs. They are for sale. I listed them in the classifies section.
I primed the pad as directed. For the following passes i used 2 pea sized drop of the product. I used compressed air to keep the pads cleaned.
I was very impressed on how well it cut. As mentioned in other review it did not cut as much as 105/surbuf. It was very easy to wipe off and had no dusting. After cutting I inspected the paintwork under the LED's and halogens. I noticed a fair amount of micro-marring. Onto the Finishing Wax. Again I was impressed. After another close inspection I still had some micro-marring. I am going to chalk this up to user error(If i am wrong someone chime in).
I followed Megs instruction on 2-3 moderate pressure passes then 2-3 light pressure passes. I did find it difficult at times to slow down and let the product/pads work their magic(due to me being an impatient person). It was a dealer car so I wasn't too concerned with perfection. I just wanted to see what this kit can do.
Overall this system is user-friendly and produces great results.
IF this last part violates any rules please feel free to delete this part.....
When I ordered the kit from my supplier I did not pay attention and ended up ordering a case of 4 kits and 2 boxes(6ea.) of extra discs. They are for sale. I listed them in the classifies section.