My Planned Process So Far... (FMJ Anyone?)

[jhstuckey]

My planned process so far is this:

Wash, Pinnacle Clay, Menzera Compound, then Menzera Final Polish--(<--VIA PC)

I know a lot of you use Menzera prounds, what do you use after them for wax/seals? Does anyone have experiences w/ FMJ? Do you apply them by hand or by PC?

Thanks,

 

[cwcad]

if you use FMJ you will not be sorry about the shine and slickness. top of the line if you ask me. I used a pc and a finishing pad to apply a nice thin layer. can be applied by hand very easily also. Remember..thin is in when it comes to FMJ.

 

[Mikeyc]

When you say Menzerna compound are you referring to Intensive Polish or Power Gloss Compound? Just curious.

Here's a thread of a car I did with IP, FPII, and then FMJ (and also after that P21S). FMJ is a great product. Extremely easy to use. Goes on easy then comes off REAL easy. Leaves a REALLY slick surface and has a nice wet shine to it. I haven't really examined the durability of FMJ in depth, but IMO the only down side of FMJ is the price. I think it's a little expensive. I usually apply it by PC to get a nice thin, even coat. I'd wager it's just as easy to apply by hand though.

 

[joe.p]

I thought the menzernas were suppose to be applied with a rotary.
When your done post some pics i would like to see how it turns out.

Good Luck
Joe

 

[Mikeyc]

I thought the menzernas were suppose to be applied with a rotary.
When your done post some pics i would like to see how it turns out.

Good Luck
Joe

It likely takes longer to work with the Menzerna polishes via PC compared to with a rotary. However, I like the results I get with a PC and Menzerna. It's likely that one day I'll buy a rotary.