Menzerna vs Menzerna vs Menzerna

C

cheeto chop

New member
PowerFinish PO203S, Final Finish PO85U, MicroPolish PO87MC, SuperFinish PO106FA, Final Polish PO85RD.



With so many finishing polishes, how does one choose whats right? Their website doesn't do a really good job at comparing them to each other.



Does anyone know the differences? Has anyone actually used all of these and compared them?
 
I don't really think that PowerFinish would be considered a finishing polish. I don't know if the search is working yet, but these polishes have been discussed to death. I'm pretty sure you've already looked at this page: http://www.autogeek.net/menzerna-of-germany.html but you can look at the cut/gloss numbers. The PO106FA and PO85RD were developed for the Ceramiclear (nano) paints...although AG doesn't say that about PO85RD, that's my recollection.
 
85rd has a strong following, and 87MC seems to be phasing out. While I like 87MC, I'm going to try 85rd when I run out
 
Setec Astronomy: Thanks. I had not looked at that link but it is VERY helpful. I finally know the difference b/t all of them.



Bottom Feeder: Dont know if you have looked at the link Setec posted, but if you havent, you may find PO85U is closer to the 87MC that you like.



Legacy99: Judging by the info on Setecs link, powerfinish may be too aggressive for what I need. But if the IP does not do the trick, I will surely follow your advise and try the powerfinish.



Thank you all for clearing things up for me!
 
I personally usually finish with 106fa Super Finish, or 85rd Final Polish. They both technically finish the same, but Super Finish has a little better cut from the start. The diminishing abrasive however breaks down to the same size after a while. Hence why Super Finish is a few bucks more than the Final Polish. This information I got straight from Menzerna USA.



John
 
Super finish is using the finest abrasives, and they are a lot more expensive then many others.

87MC is and 85U is not so popular in Europe and I believe that the dealers are selling RE5 and RD instead.

I finish only with Super finish nowadays.



We did get a visit from Menzerna a week ago, and he used PO203 Power finish on 80% of he's works. For heavy compounding

he used S500 fast gloss and PO106 Super finish for finishing.



I posted some pictures from the days with Axel here:



http://www.autopia.org/forum/click-brag/130720-some-pictures-menzerna-polishing-workshop.html
 
I'd stay with 2 polishes ... PO203 and finish up with PO85RD ..... That combo should handle most any situation you have. It will produce stunning results!
 
MDRX8 said:
I'd stay with 2 polishes ... PO203 and finish up with PO85RD ..... That combo should handle most any situation you have. It will produce stunning results!
Click to expand...



Yes, thats a great combination. Power finish is very versital.
 
You must log in or register to reply here.
Back
Top