megs products

ericsscion

i luv my makita and pc
what do u guys think about this combo...

DACP, #9, megs deep crystal polish and deep crystal carnuba..



am i overdoing it by using #9 and the polish or is it ok?
 
Your using 3 polish/cleaners, im not sure thats all necessary. Try 83 then crystal polish, then Carnauba, or 83, 9, carnauba. I think you can skip one of the middle steps......
 
Pat the Deep Crystal Polish is actually a glaze. It has no cleaning ability at all. Yet another confusing blend of the polish/glaze term!!



I think the #83, #9 , Deep Crystal Polish then Deep Crystal Carnauba is a good combo. If you do not get any micromarring from the #83 then you can skip the #9 and proceed with your other steps.
 
Try #80 first, if you can. It's less aggressive than #83, and is less likely to leave micromarring. #83 is very sensitive to the product/area ratio (either too much product per area or too little product per area leaves micromarring), and there is a very small window at finish; if you remove it too soon OR too late you get micromarring.





Tom
 
Back
Top