McKees 37 New Extreme Foam formula!!!

Justins00ss

Active member
I had a little time yesterday to wash up the mommy mobile so I thought it was a good time to try out the new McKee's 37 Extreme Foam Formula.





The candidate for this test was my 07 4 door Silverado 1500 LTZ. This truck hasn't got much love in recent months so it was filthy from the New England roads. A few months ago I polished the truck with Carpro Essence and topped it with Wolfgang Uber Ceramic Coating as a test.







I began by pouring about 2oz of product into my Wolfgang foam gun and then filling it with water. As soon as the water hit it it turned into a thick foam.



All I did before applying the foam was just clean the wheels and tires then gave the truck a quick rinse. Then I set my foam gun to the highest foam setting and went to town.(can never have too much foam!)







After letting the foam dwell I proceeded to do a normal wash with my microfiber wash mitt with a bucket of the extreme foam formula mixed up with water.

I have to say that it did a great job of breaking through the dirt and grime and left a nice clean surface. Drying was handled with my waffle weave drying towel.

Finished result. Just washed and dried here. No QD or spray wax in these pictures.




 
Nice review. I enjoy using the DP version.

Me love foam, but for some reason, I don't have much luck with it.

What is your dilution ratio? Perhaps the water in your area is on the hard side.

I used 2.5 oz's in this foam gun to get a little thicker foam and it foamed up really nice.

IMG_5342a.jpg
 
was that foam from a power washer? Not trying to offend anyone, but that foam really does not look that thick if it was...am I missing something here?
 
was that foam from a power washer? Not trying to offend anyone, but that foam really does not look that thick if it was...am I missing something here?

No not from a pressure washer. Pressure washers use a foam cannon. This is just a standard foam gun.
 
Water IS hard.

I'd normally put in a few ounces of soap, then equal (have used lots more, but that didn't work either)

I have to keep shaking foam gun, and still only get 1/2 or less than I see on yours.
 
was that foam from a power washer? Not trying to offend anyone, but that foam really does not look that thick if it was...am I missing something here?

I would call it average suds for something from a foam gun but there are plenty of variables (foam gun setting, water quality, amount of soap, foam gun brand).
 
Back
Top