LF Correction: BMW 540 IT Metallic Black with Buffer Swirling

Woob

New member
540TI with the case of rotary buffer swirling from a bodyshop. Opted for a 1 step correction since this vehicle is a daily driver and goes through a fair amount of work. Under halogens the buffer swirls were not shown, so in sunlight it was revealed to be more microscopic in action. Paint reads still averaged around 130 at the end of the session.

Wheels - Sonax Wheel Cleaner / Optimum Power Clean various brushes.

Tires – Optimum OptiBond

Wash – Bath with Optimum Wash, Power Clean – Pre Wash/Prep Paint.

Decontamination – Nanoskin Towel, Optimum No Rinse

Polish – M105 & D300 via DA MF Megs Pad

Wax – Optimum GPS with Green 5.5, OptiSeal, Optimum Car wax

Wheels - OptiSeal

Various Products: AutoFinesse Revive, GR 40 Trim Cleaner. Optimum OptiClean

Before

OK from a distance

7851488552_6d52a87189_c.jpg


Wait, first sign of damage.

7851493422_b420bc9029_c.jpg


Microscopic damage over all the car obviously from a rotary. None of it showed up via halogens.

7851492774_e49459e910_c.jpg


Never accept this.

7851489244_daffaa44b7_c.jpg


Lots of potential

7851487862_2a69586747_c.jpg


During - Day 1 finish, looking decent just needs sun to inspect and see if there is any residue.

7851487434_52783571e6_c.jpg


7851492206_47c38c7605_c.jpg


After - Decent 1 step approach for a daily driver.

7851489706_a3280e03d2_c.jpg


7851490458_261b56f666_c.jpg


7851490950_8feff70be0_c.jpg


7851491436_b2730efb2d_c.jpg


7851494064_641e547661_c.jpg


7851495364_0d9106345b_c.jpg
 
Back
Top