Latest Acquisition: Meguiar's M101

I am still interested if you got any I could get just LMK on the details and I can send payment. Thanks you so much.
 
snosh said:
I am still interested if you got any I could get just LMK on the details and I can send payment. Thanks you so much.
Click to expand...



Looks like the PM I sent yesterday didn't get through to you; I'll re-send it now. Sorry about that!
 
C. Charles Hahn said:
Looks like the PM I sent yesterday didn't get through to you; I'll re-send it now. Sorry about that!
Click to expand...



I didnt get a pm so your right but its all good just send me another with the details and ill get back with you asap
 
UPDATE: I have good news and bad news.



The good news is that I got another delivery today:



IMG_2225.JPG




IMG_2228.JPG




The bad news is that when I opened the cases of quarts, I found this:



IMG_2229.JPG




IMG_2231.JPG




IMG_2232.JPG




IMG_2234.JPG




So, I have now received all of the quarts I ordered save for the two damaged bottles (all others in this shipment were not damaged, and cleaned up with no trouble) and I am only waiting on two more cases of gallons.



I have contacted the vendor to see what we can do about getting replacements for those quarts ASAP. Again, all orders will ship in the order payment is received. I'll be dropping off the paid orders from today at the post office later this afternoon.
 
All orders from today were shipped this afternoon.



Garry Dean said:
Dude, scrape up that m101! It's still useable! That's poop bro...
Click to expand...



I did scoop what I could into a bottle; and there is still good product in those bottles that didn't leak... but obviously I can't sell them as new factory sealed quarts. :( Thanks Garry.
 
DDN79 said:
Anyone have a tutorial on 101 yet? Does it work the same or close to M105?
Click to expand...



Pretty sure I'll have a truck in need of some 101 lovin' this week to work on, I'll see what I can do.







Quick tip for those of you buying this stuff: when you get to the point where your bottle is running low, don't just throw it out! I emptied out the damaged quart bottles this morning and when I was done, I could tell there was quite a bit of product still in the bottles. Decided to cut them open with a utility knife and here's what I found:



IMG_2237.JPG




That's a LOT of product that would have been wasted. This compound is really dense and really sticky, and clings to the sides of the bottle like crazy. Maximize your investment and scrape down the bottle when you're running low. :peace:
 
If using a da machine, go slow, good pressure until area is clear behind the pad. At least that is what I do, with all compounds. That way I don't have to make a million back and forth passes. What are you using? What pads?



DDN79 said:
Anyone have a tutorial on 101 yet? Does it work the same or close to M105?
Click to expand...
 
thomasdekany said:
If using a da machine, go slow, good pressure until area is clear behind the pad. At least that is what I do, with all compounds. That way I don't have to make a million back and forth passes. What are you using? What pads?
Click to expand...



I have a PC with several different pads. From the Surbuf, to the cyan and orange LC Hydrotechs, to the orange and yellow CCS pads
 
DDN79 said:
I have a PC with several different pads. From the Surbuf, to the cyan and orange LC Hydrotechs, to the orange and yellow CCS pads
Click to expand...



The Surbufs are going to give you the most cut for sure.











In other news, all orders from the weekend/today have shipped. Also had 4 more gallon jugs of inventory delivered today.
 
You must log in or register to reply here.
Back
Top