Is 1z MP similer to AIO?

B

Brazo

New member
Can MP be used as an alternative to AIO or to properly clean the paint should you go AIO and then MP.



Really I am looking to use MP as a base for 1z glans waz and would prefer to use MP rather than AIO



TIA
 
Both AIO and MP work well with GW. Though I personally prefer MP (when used in conjunction with GW) . . . not sure how to best describe it, but visually the metallic flakes seem jump more from the finish. From a cleaning aspect, AIO is much more thorough. Either way, you can’t go wrong. Good luck :)
 
GW was designed to go right on top of MP, so you don't have anything to worry about.



That being said, I find that all sealants have a little bit more longevity when used after a good AIO cleaning, but that's just my personal preference. Like the others already said, both will work great.



I don't know if you've used GW already or not, but here's a tip. Be sure to apply it as thin as possible. Almost to the point where it's hard to see if you even have anything on the surface otherwise it can be a bit troublesome to remove.



Also, treat it like SG. Either remove it immediately or let it dry for at least 30 minutes before removing. It doesn't like to come off during that inbetween curing stage.
 
MP is a combination abrassive and chemical cleaner with a wax. IMO its better as a base for Glanz Wax as it removes swrils better than AIO because of the abrassives. I think it cleans better than AIO, but AIO has an acrylic protectant that probably last longer than MP. Since your using a Glanz Wax the extra protection will not matter.
 
Many thanks guys



Mp it is then! I have obtained some spray bottles as when searching through some threads it recommeded misting the glans wax to get a thin coat and also help release some of the 'carrier' solvents
 
You must log in or register to reply here.
Back
Top