i made an interesting observation tonite. i applied aio yesterday to the entire car yesterday w/ the exception of the roof. this evening it was cold out, around 48 degrees. the ware i was in was a bit humid. it's typical for frost to form on the body panels at nite. well on my roof where it was just zaino, frost formed. the interesting thing is that on the rest of the car, there was no frost:up
i will note that i may have incorrectly applied aio. i used a damp foam applicator pad, and for every panel i used a dime sized drop of aio and a shot of eagle one wet and wipe. after about 4-5 panels, i stopped using the shot of eagle one. i did this in 2 layers. now the aio was pretty hard to buff off after it had dried. at this point i knew i was doing something wrong (probably a combination of allowing it to dry and use of the quick detailer)
but in the end, i'd just thought i would share this observation.
i will note that i may have incorrectly applied aio. i used a damp foam applicator pad, and for every panel i used a dime sized drop of aio and a shot of eagle one wet and wipe. after about 4-5 panels, i stopped using the shot of eagle one. i did this in 2 layers. now the aio was pretty hard to buff off after it had dried. at this point i knew i was doing something wrong (probably a combination of allowing it to dry and use of the quick detailer)
but in the end, i'd just thought i would share this observation.
