i thought i had it down

[imported_glfahlc]

spent about 8-10 hrs on the bimmer using a ccs orange and sip, followed by super finish polish and a red ccs. looked exquisite until the flash hit it.... next step is the yellow pad with the sip. should i order the purple while i'm at it...

http://s22.photobucket.com/albums/b312/71redskin/beemer/bimmer detail/

 

[Old Pirate]

I can't see the picture

 

[Harleyguy]

No pictures to see has a password on it.Maybe you should do a test panel before you spend that kind of hours again.

 

[Tuck91]

I use my own two hands

 

[Dave1]

No pictures to see has a password on it.Maybe you should do a test panel before you spend that kind of hours again.

No doubt about it.......

 

[Dsoto87]

Ive never used Menzerna but like someone else said, you need to do a test spot on every car. Once you do get it down on your car, that doesnt mean the same process will work on another.

Anyways, like I said, Ive never used menzerna but it sounds like your skipping a step.

SIP on an orange pad would be pretty agressive. It might needed to be followed up by another step, not just a finishing polish on a no cut pad.

You have no idea if the swirls are there because the SIP couldnt take it out, or because its marring left from SIP. Do the test spot with step 1, check your work. Step 2, check work.etc,etc,etc...

Before you go to sip with yellow, try sip with white. You might just need to clean up.

 

[imported_glfahlc]

Ive never used Menzerna but like someone else said, you need to do a test spot on every car. Once you do get it down on your car, that doesnt mean the same process will work on another.

Anyways, like I said, Ive never used menzerna but it sounds like your skipping a step.

SIP on an orange pad would be pretty agressive. It might needed to be followed up by another step, not just a finishing polish on a no cut pad.

You have no idea if the swirls are there because the SIP couldnt take it out, or because its marring left from SIP. Do the test spot with step 1, check your work. Step 2, check work.etc,etc,etc...

Before you go to sip with yellow, try sip with white. You might just need to clean up.

that just might do the trick dsoto.... a few pics;