How many layers of Klasse SG on wheels?

I would say so. For maximum shine, I believe 5 coats is the climax. As far as protection, I'd say you're good for a while.
 
Opass- Yeah, that should be fine. I put four on mine, and that extra was probably overkill. Remember to only wash them with carwash shampoo and to clay them very gently if it's needed.
 
Plazaman- Unless you just do a layer after every wash. With the wheels, I had them off the vehicle so I just spread it out over a few days. With something that's always in service I just get one layer on for starters and then do more whenever I wash it.
 
Accumulator said:
Plazaman- Unless you just do a layer after every wash. With the wheels, I had them off the vehicle so I just spread it out over a few days. With something that's always in service I just get one layer on for starters and then do more whenever I wash it.
Click to expand...





layer every wash sounds good.



SG alone or AIO then SG?
 
can somebody describe the process in detail? Like:



wash, AIO, SG.....



how long do you have to wait after AIO, or should SG be let to sit on the wheel for an hour and then wipe off...



thank you guys
 
plazaman said:
layer every wash sounds good.



SG alone or AIO then SG?
Click to expand...

SG alone, AIO would remove the previous layer/s of SG



horatiub:

Your process is correct: wash, AIO, SG.....



No wait after AIO, but 24 hours between applications of SG. Let SG dry (haze) before removing.
 
You should be good for at least a few washes. Wash your wheels the same way you do your car (same carwash) but use a separate washmitt. You should be able to clean your wheels now by hand using carwash and a washmitt. When they become harder to clean, use a spray on wheels cleaner, and apply more wax or sealant.
 
You must log in or register to reply here.
Back
Top