heres My poorboy detail .

harry444

harry444

New member
I took some pictures of my car after doing my last coat of Natty's Blue
the detail products are as followed..

SSR2.5 with orange cut pad only in spots where needed with PC set on 6
SSR2.5 with white polishing pad with PC set on 6
PwC blue with PC set on 3 then finished on 5
EX x3 first coat with PC set on 1.5 second and 3rd coat done by hand let each coat set on car 2 hrs before removing
Natty's blue X5 by hand waited 1 hr between coats
every product went on smooth and came off very easy I am very happy with the results!
poorboy2.jpg

poorboy1.jpg

c8ba9f80.jpg
 
Thanks Blueline1 I enjoy keeping my car clean and I love the look that PB gives me! Thanks to Steve who directed me in what to do ...
 
Looks good- Big pictures though. I'll be cleaning up a Bullitt tomorrow with pictures hopefully. Gotta love mustangs,
 
Looks great - some advice for you ;) if you want it. If you apply EX in layers you should only use the PC for the first layer. You should wait 24 hours between coats. If you apply the second or third do it by hand. The PC will just remove the previous layer you worked so hard to get on their.

PWC - since you used SSR 2.5 by machine, maybe try putting on PwC by hand - it acts more like a glaze if used by hand.

Natty's same thing - you should wait a day between layers. Reason being the wax and the poly layer of Ex need 24 hours to cure. Make sense??

but all that being said - really looks great.
 
I did the Ex exactly as stated and it takes me about 6 hrs to do a complete detail on my car sorry about the big pictures Natty's always done by hand but I disagree and waitting 24 hrs between coats of natty's I wait 1 hr between coats but wait 36 hrs before putting wax over EX then I layer Nattys on.
 
You must log in or register to reply here.
Back
Top