help

[harleytrkguy]

OK, I have used ZANIO on my truck ever since i got it back in july. I have a Harley Davidson Edition Ford F150 and i love it. The problem is that i have started to use the PC on the cars and trucks that i detail and notice that it does a great job. I think i will be able to do an even better job once i learn some tricks and whatnot. I am interested to know what you all think that I should use to make this paint "show" paint. It is a great paintjob already, but i want to put more depth into it. I have 83, 82, 7, nxt, and 26. Is there anything else that i can do or should get before i put a plan into effect with these. I was thinking hand polish but not sure???



here are the steps i was thinking.



1. 82



2. hand polish or #7??i dont have 81 but i do have 7

3. nxt again



I thought about 7 and it doesnt seem like you all are useing that much on CC's so i figured i would leave it out. I have a show this sat and would really like your alls input on this matter.

Thanks

Keith

 

[Gonzo]

Saturday doesn't leave a whole bunch of time. I don't think you have time for a proper buff-out. I would try to find some NXT and NXT Spray Wax. That is the short term answer, IMHO.



Longer term -- EINSZETT triplets!



Then use Menzerna FP as your last step polish to remove the fillers and oils of the 1Z. If you see marring , polish those areas with 1Z some more and finish off with FP. Go to a grocery store at night and look for residual marring under the lights at night - take some painters tape to flag the areas needing more work. If your budget allows buy a 500 watt "contractor light" at Lowes or Home Depot then you don't need the grocery store. Work the paint until NO marring is visible, then apply the finish of choice.



I use the Klasse twins at the moment and after AIO x 2 and SG x 3 the shine will burn holes in your retinas.