Hey guys...I'm new to the forum and have read quite a few posts for research, but had a couple quick questions. I have a navy blue 2000 Pontiac Grand Prix with less than 30K. It's never been in snow and always garaged. My question is what products would you recommend to use for polishing and finish work? I have very few light swirl marks, and the paint is nice and smooth. I really just want to give some depth to the dark blue. I'm purchasing a PC tonight, but was curious about which pads to get as well. I've always used Meguiars products in the past. Does anyone recommend their polishes and pads? Thanks for bearing with me and any help would be appreciated. -Scott-
Help with polishing products & pads
- Thread starter sclaypool
- Start date
Brenton
aka PEI Detail
Hey, welcome.
I'm Brenton from PEI.
With any polisher, use the softest pad possible for the job. I use Edge system of pads, which I love. Until you have experience, stick with the med-cut pad at the most. But if you are totally inexperienced, use an abrasive polish with a light cut or polishing pad. It will take longer and is harder on the pad, but you will be pleased.
I might do this:
1. Poorboy's SSR2.5 with light cut pad.
2. Poorboy's SSR1 with light cut pad.
3. Farecla G10 with polish pad/Poorboy's Polish w. Carnauba with polish pad.
4. A nice sealant like Poorboy's EX-P. Meg's NXT Tech Wax is fine.
5. A nace wax, like Poorboy's Natty's or Souveran, at least 24 hours after the sealant.
I'm Brenton from PEI.
With any polisher, use the softest pad possible for the job. I use Edge system of pads, which I love. Until you have experience, stick with the med-cut pad at the most. But if you are totally inexperienced, use an abrasive polish with a light cut or polishing pad. It will take longer and is harder on the pad, but you will be pleased.
I might do this:
1. Poorboy's SSR2.5 with light cut pad.
2. Poorboy's SSR1 with light cut pad.
3. Farecla G10 with polish pad/Poorboy's Polish w. Carnauba with polish pad.
4. A nice sealant like Poorboy's EX-P. Meg's NXT Tech Wax is fine.
5. A nace wax, like Poorboy's Natty's or Souveran, at least 24 hours after the sealant.
You will proabably get lots of different answers to your questions so here's mine.
Pads:
I have only used Meguiar's pads and have been happy with them.
I use polishing pads for polishes and finishing pads for waxes or sealants.
I don't own any cutting pads.
Products:
Meguiar's #83 DACP has worked good for a slightly aggressive product.
Meguiar's #9 Swirl Remover works for the times when the marring is not as severe. Meg's #80 and #82 also work well.
They seem to be good products and are usually available locally.
Recently I have received Poorboy's SSR 2.5 which will be replacing my DACP. Since I haven't used the SSR 2.5 yet, I can't comment on it other than I read enough good things about it to give it a try.
Charles
Pads:
I have only used Meguiar's pads and have been happy with them.
I use polishing pads for polishes and finishing pads for waxes or sealants.
I don't own any cutting pads.
Products:
Meguiar's #83 DACP has worked good for a slightly aggressive product.
Meguiar's #9 Swirl Remover works for the times when the marring is not as severe. Meg's #80 and #82 also work well.
They seem to be good products and are usually available locally.
Recently I have received Poorboy's SSR 2.5 which will be replacing my DACP. Since I haven't used the SSR 2.5 yet, I can't comment on it other than I read enough good things about it to give it a try.
Charles
Thanks for the quick reply guys. I'm curious about the Meguiars polishes & finishing products. What do the 83, 9, 80 and 82 represent? Are those product numbers? Where do I purchase these at? I'm really trying to decide if I should really be that brand loyal to meguiars or give poorboys a shot. In a perfect world I'd like to see the two polishes/finishers from both and where to get them. I know that's a lot, but even a push to a couple websites would be very helpful. -Scott-
Meguiar's #83 - Dual Action Cleaner/Polishsclaypool said:
Available at auto body supply stores and some auto parts stores. Comes only in 32 oz. and 1 gallon size. (A big reason why I am getting away from it.)
Meguiar's #9 - Swirl Remover
Available at auto body supply stores and most auto parts stores. Comes in 16 oz. and 1 gallon size.
Meguiar's #82 - Swirl Free Polish
Available at auto body supply stores and some auto parts stores. Comes in 32 oz. and 1 gallon size.
Meguiar's #80 - Speed Glaze
Available at auto body supply stores and some auto parts stores. Comes in 32 oz. and 1 gallon size.
For the hobby detailer, some of the Meg's products are packaged in quantities that will last you for a loooong time.
Poorboy's products have a very good reputation and are packaged in sizes that work much better for most of us.
Go to Premium Auto Care's Brand Name Page, click on the Meguiar's link for Meguiar's information, click on the Poorboy's link for Poorboy's information.
Charles
cwcad
New Normal
I think that both respondents to this thread gave you advise that you can use. The products mentioned will get you results. Do you want to buy locally? Do you want to use the internet?
I started out using the meguiar's line of products. The reason that I changed basically was because I got the bug for detailing that one source was not enough for me. I was and still am looking for the perfect shine.
Poorboy's will give you a product that will give you great results. I have the full line. I also have the full line of Menzerna products. These also give great results.
Why don't you pick a product line from one of the sponsors of this site. The customer service of all the companies is terrific. They will help you make a choice. Then get used to using them. After becoming comfortable with a product line you can decided from use as well as reading the threads of this forum what you want your vehicle to look like.
For me, I have choosen to use a different product for all of my vehicles. I use Zaino on my wife's car. I use Klasse Twins on my Bravada. I use my truck as a test bed for looks mostly. Durablity is not an issue for the truck. It is on the others.
I started out using the meguiar's line of products. The reason that I changed basically was because I got the bug for detailing that one source was not enough for me. I was and still am looking for the perfect shine.
Poorboy's will give you a product that will give you great results. I have the full line. I also have the full line of Menzerna products. These also give great results.
Why don't you pick a product line from one of the sponsors of this site. The customer service of all the companies is terrific. They will help you make a choice. Then get used to using them. After becoming comfortable with a product line you can decided from use as well as reading the threads of this forum what you want your vehicle to look like.
For me, I have choosen to use a different product for all of my vehicles. I use Zaino on my wife's car. I use Klasse Twins on my Bravada. I use my truck as a test bed for looks mostly. Durablity is not an issue for the truck. It is on the others.
wow...thanks for all the great input. You guys definetly know your stuff. In terms of purchasing the products, I'd much rather give my business to a sponsor of the forum. I've found the past the best way to keep sites like Detail City thriving is through support for those who sponsor. To be honest I'm leaning towards the Poorboy's line now. I'll probably give them a call and see what the recommend for my particular situation. Thanks again, -Scott-
Brenton
aka PEI Detail
USA88GT said:
If you eliminate step 3, you are probably okay, but for swirl removal I encourage all steps, though more agressive if you have more experience.
I put Souveran over EX-P, NXT, and Klasse SG--all had nice results. I've never layered more than 3 layers of Souveran, and I've never had the results like the website.