HELP!! What pad for what product????

Z

zarko

New member
ok this is what i have.......



PADS!!!!

Blue Pad = Finesing pad

Yellow Pad = Cutting Pad

Green German Pad = consistent pressure polishing pad (Note: 00 Audi A6)

Gray Pad = Finishing Pad



Product!!!!!

Menzerna Intensive Polish

Menzerna Final Polish

Klasse AIO

Klasse Sealant Glaze



Plz let me knoww ich product goes on which pad....and which Products to apply First, Second ....ETC



Thank you :usa
 
Just a noob here myself, but I would say



Menzerna Intensive Polish = Green, do you have an orange? yellow might be too rough with a PC, depends on the paint I think.

Menzerna Final Polish = Green or Blue

Klasse AIO = Blue maybe

Klasse Sealant Glaze = by hand, search for the WOWO method here.



The order you've got them in is the correct order of application.
 
original.jpg


Borrowed from another poster here. on edge 2000, black pad is now orange i believe
 
all my pads are wolfgang except Green German Pad......



and About to rough,, i dont think so due to the fact that they consider the clear coat on audi's just as hard as cermaiclear...(so ive heard)
 
Yeah, if the "Green German Pad" is that big thick one I wouldn't bother with it on an Audi. I've done '00 A6s and my wife's A8 is also an '00; I've never bothered using my big green pad as it'd be too mild for anything on an Audi, at least with a PC. Might use it for some final burnishing if I didn't have he Cyclo, but for correction? Forget it.



Sorta funny, the ad copy showing an A6 and talking about "soft German clear" :rolleyes:



I'd do the KSG by hand, much easier to get it on as thinly as you oughta.



Not knowing whose blue pad you have and not being familiar with any blue pads anyhow, I'd guess that you'd use it (or something with a bit more bite) for the FP and something similar for the AIO.





Get all the marring out with the IP and then use the FP to remove the micromarring from that. Don't expect any significant correction from the FP; don't switch to it until things are awfully close to the way you want them.
 
i wouldnt say pointless. What he's trying to say is the IP is an abrasive polish, which will leave some micromarring. Since the FP isn't as abrasive, it will take out the marring left by the IP.
 
Yeah, that's right. When I used FP (that's FPI but the FPII oughta be similar) on my S8 it would only take out *REALLY* light marring, the kind most average people don't even see on many paints (especially light colors and metallics). So to reword my previous post- you want to do most of the work with the IP, which can actually do some real correction. Then use the FP for the very light micromarring that the IP will probably leave behind.
 
Is there any other product you would use..instead of these im about to use....



and thank you so much for the help....
 
one more thing afther i do this procces...



Menzerna Intensive Polish

Menzerna Final Polish

Klasse AIO

Klasse Sealant Glaze



Would you reccomend i put a wax on top....
 
Zarko- I'd just use those products. They're good and if you work with them enough to learn them you'll be well-set. I quit topping my KSG as I like to add more every now and then (after a gentle claying with Sonus green).
 
You must log in or register to reply here.
Back
Top